Advantages and featuresModern load-frame design • The robust load-frame features four hard-chromed guide-columns and massive base and moving crossheads, ensuring excellent guidance properties and a high level of machine stiffness. • Maintenance-free digitally controlled AC drive technology combined with an innovative motor feedback system allows excellent constant speed characteristics to be achieved even at extremely low speeds. • The backlash-free pre-stressed precision ball-screws with digitally controlled AC servo drive allow virtually maintenance-free operation. • The large test area combined with low overall height enables specimens and components with a wide range of lengths to be tested. • The testing machine is positioned directly on the ground with no foundation. Operator convenience • Convenient operating height for specimen insertion with grips installed. • testXpert III's intelligent test environment concept reduces set-up times and increases productivity. Innovative electronics • The new testControl II measurement and control electronics provide the ideal basis for precise, reproducible test results. • Developed in-house by ZwickRoell, the electronics impress through maximum accuracy, high measured-value rates and flexible modularity. Satisfying the most demanding safety requirements • Compliance with the statutory safety requirements of the EC Machinery Directive is ensured in all materials testing machines, while an EC Declaration of Conformity accompanies every machine supplied. • Only the latest safety technology and proven industrial components are used. • The highest degree of safety for the operator, test results, specimen material, and testing system are guaranteed. Future-proof • Modular design means that the testing system can be re-equipped or upgraded whenever required. • Moreover, testControl II control electronics are compatible with future-generation ZwickRoell software. • Even after a product has been discontinued, spare parts remain available for a minimum of 10 yea

Description Load frame Paint finish Ambient temperature Humidity (non-condensing) motor holding brake Control, set-value specification Controller/cycle time Repeat positioning accuracy on crosshead Measurement and control electronics Number of slots available for measurement and control module Force measurement Calculated resolution (e.g. load cell in tensile/compression direction) Measured-value sampling-rate, internal Measured-value transmission rate to PC Zero-point correction Measurement signal runtime correction for all channels Interface to PC Eco mode? Electrical supply data Mains supply...

Product InformationMaterials testing machine Z330E with testControl IIProduct data Type Item Number Load frame Test force Fn in tens./comp. direction No. of guide columns No. of drive screws Stiffness of load frame at H2 = 1000 mm Height - H1 Width - B1 Depth - T1 Test-area width - B2 Test-area height - H2 Test stroke - H3 (with hydraulic grips) Weight without attachments with hydraulic grips Specific floor loading (with hydraulic grips) Noise level at maximum test speed Crosshead speed Increased crosshead return speed (at reduced force) Drive travel resolution Overview of load frame All data...