Product Information BUP 1000 sheet metal testing machine H1 H2 H3 B Figure: BUP 1000 Figure: BUP 1000 with dimensions Application range • Hydraulic cup extractor through integrated piston, with piston rod functioning via punch. Testing of formability of sheet metal in accordance with the most common standards and procedures (DIN EN ISO 20482, DIN EN 1669). Testing the influences of surface treatments, coatings and lubricants, with typical types of forming processes such as cupping and earing tests. Testing the effect of tools and process parameters on the forming process. Advantages and features • Easy and rapid interchangeability of test tools, such as punch, die, blankholder, cutting ring, cutting punch and scraper ring. Numerous modular possibilities of extensions. PI 711 2.0111 • Tooling from most earlier generations of machines can be incorporated conditionally. Tooling for all well-known test procedures available as standard, special tooling on request. • Low cylinder-piston frictions deliver precise measurement acquisitions and excellent reproducibility. • Silent and clean operation. Easy transport, due to compact machine. PI711_BUP1000.pmd • Hydraulic opening and closing of tool head (2-hand-operation). • Pivoted electronics, the reading angle for the measurement values can be adapted to different operators. • Ergonomically arranged operational controls. Working mode key for automatic or manual operation. • All functions secured hydraulically and electrically push-button activation. • Prevention of unrealistic earing of cups through adjustable clamping force which is automatically released during a test. • Automatic setting of the pre-selected clamping force after stamping. • Deep drawing speed increasing or reducing during the test. • Automatic piston return and disconnection after end of test by crack detection or maximum ram stroke (s-limit)

Zw/ck / Roell BUP 1000 sheet metal testing machine Digitally displayed unit min. [kN] Clamping force range [kN] Digitally displayed unit min. [kN] Ram stroke (travel of deep draw piston) [mm] Digitally displayed unit min. [mm] Deep drawing speed max. [mm/min] Digitally displayed unit min. [mm/s] Dimensions of test tools Punch diameter (male mold) max. [mm] 120 Disc diameter inserted (with centering device) max. [mm] 220 Disc diameter stamped [mm] 250 Sheet metal strip width max. [mm] 260 Sheet metal strip thickness max. [mm] 10 H2 - Height without display panel [mm] 1540 Electrical connection...