video corpo

roboTest A
2Pages

{{requestButtons}}

Catalog excerpts

roboTest A - 1

Product Information Robotic Testing System ‘roboTest A’ (Compact) Robotic testing system ‘roboTest A’ with testing machine 20 kN Pincer gripper removes a specimen from the magazine Applications Advantages of the Robotic Testing System ‘roboTest A’ The robotic testing system is used for the fully automatic performance of tensile tests on: • Metallic specimens (e.g. according to DIN EN 10002-1, ISO 6892, JIS Z 2201, ASTM E8) • A high reproducibility of the test results is obtained because operator influences are excluded (hand temperature, moist hands, eccentric or inclined insertion of specimens etc.). • Qualified laboratory staff is relieved of routine jobs and • Plastics specimens (e.g. according to ISO527-2, ASTM D790) is thus available for more complex activities. • The machine can be used during idle times (break, • Dimensionally stable specimens of other materials (e.g. wood) night shift) thus increasing the rate of utilization and allowing „quicker“ results. • The system reduces the testing costs per specimen System Configuration • Materials testing machine 5 kN up to 250 kN with symmetrically closing, pneumatic or hydraulic specimen grips and an optional extensometer and usually pays off within one to two years. • Manual tests are still possible by simply pushing the robotic feeding system aside. • The automatic data logging system ensures secure • Robotic feeding system ‘roboTest A’ with integrated magazine for 20 specimens PI478 2.0509 • Industry Controller with test software testXpert ® and automation software autoEdition2 PI478_roboTestA.pmd documentation and enables statistical long-term monitoring (Statistical Process Control).

Open the catalog to page 1
roboTest A - 2

Product Information Robotic Testing System ‘roboTest A’ (Compact) Technical Data Mechanics Mounting Capacity Dimensions (H x W x D) Weight 1) 2) Swivellable at the load frame 20 specimens 1500 x 6901) / 8402) x 600 mm Approx. 85 kg (without specimen) Load frame in profile design Load frame in column design Connected values Electrical connection Output Mains frequency Compressed air Required compressed air Working area of the robotic testing system ‘roboTest A’ 230/115 V 200 VA 50/60 Hz 6 bar 2 lpm Control Automation software Peripheral connection autoEdition2 PROFIBUS Test Sequence • The...

Open the catalog to page 2

All ZwickRoell GmbH & Co. KG catalogs and technical brochures

  1. Image Brochure

    20 Pages

Archived catalogs

  1. Zwick/ZHU250

    3 Pages

  2. HC range

    2 Pages

  3. ProLine

    2 Pages

  4. testXpert II

    20 Pages