Product Information Robotic Testing System ‘roboTest P’ (Portal) for Metals Advantages of the Robotic Testing System ‘roboTest P’ • A high reproducibility of the test results is obtained because operator influences are excluded (hand temperature, moist hands, eccentric or inclined insertion of specimens etc.). • Qualified laboratory staff is relieved of routine jobs and is thus available for more complex activities. • The machine can be used during idle times (break, night shift) and thus increases the rate of utilization and allows „quicker“ results. • For increasing the specimen throughput several materials testing machines can be integrated. Pic 1: Robotic testing system ‘roboTest P’ • The modular system makes an economical adaptation to specific customer requirements possible. Application • The system reduces the testing costs per specimen and usually pays off within one to two years. The robotic testing system is used for the fully automatic performance of tensile tests on metallic specimens (e.g. according to DIN EN 10002-1, ISO 6892, ASTM E8, JIS Z2201). Additional tests like hardness or roughness measuring can be carried out, too. • For manual tests the specimen gripper can be moved to the side, allowing operator free access to materials testing machine. • Due to the precise centering of the specimen in the System Configuration cross-section measuring device and the automation of the measuring sensors, the specimen dimensions can be exactly measured. • Materials testing machine 5 kN up to 2000 kN with symmetrically closing, pneumatic or hydraulic specimen grips and an optional extensometer • Specimen magazine for up to 400 specimens (depends on specimen dimensions) • Robotic feeding system ‘roboTest P’ • Barcode scanner (optional) • Cross-section measuring device (optional) • Other devices (see options) PI231 2.0509 • Industry Controller with test software testXpert ® and automation software autoEdition2 PI231_roboTestP_Metall.pmd • The usage of state-of-the-art web-technologies ensures a constant process control and remote diagnostics of the robotic testing system. Results as well as status messages can be sent directly per email or SMS. • The automatic data logging system ensures secure documentation and enables statistical long-term monitoring (Statistical Process Control). • The components of the robotic testing system are not subject to wear; they are maintenance-free and designed for three-shift operation.

Product Information Robotic Testing System ‘roboTest P’ (Portal) for Metals Technical Data Mechanics Dimensions (H x W x T) Weight Connected values Electrical connection Input / Output Mains frequency Compressed air Required compressed air 1) depends on the equipment depends on the equipment 230/400 V up to 80 kVA1) 50/60 Hz 6 bar from 10 lpm1) depends on the equipment Control Automation Peripheral connection Measuring of the specimen thickness and with by the crosssection measuring device Test Sequence • The user fills the specimen magazine directly on the test system or outside the system....