Product Information Robotic Testing System ‘roboTest F’ (Clamp) for Rigid Specimens Advantages of the Robotic Testing System ‘roboTest F’ • A high reproducibility of the test results is obtained because operator influences are excluded (hand temperature, moist hands, eccentric or inclined insertion of specimens etc.). • Qualified laboratory staff is relieved of routine jobs and is thus available for more complex activities. • The machine can be used during idle times (break, night shift) and thus increases the rate of utilization and allows „quicker“ results. • The system reduces the testing costs per specimen and usually pays off within one to two years. Robotic Testing System ‘roboTest F’ • Manual tests are still possible by uncoupling the robotic feeding system. Applications The robotic testing system ,roboTest F’ is used for the fully automatic performance of tensile tests on rigid specimens such as metallic and plastics specimens, wires, components and concrete steel specimens. • The usage of state-of-the-art web-technologies ensures a constant process control and remote diagnostics of the robotic testing system. Results as well as status messages can be sent directly via email or SMS. • The automatic data logging system ensures secure With the robotic testing system the use of different specimen holders is possible. The specimen holders are available as metal clamps, braces or magnets and are optimized for the different kind of specimen shapes. documentation and enables statistical long-term monitoring (Statistical Process Control). • The components of the robotic testing system are not subject to wear; they are low maintenance and designed for three-shift operation. System Configuration • Materials testing machine 5 kN up to 250 kN with symmetrically closing, pneumatic or hydraulic specimen grips and an optional extensometer • Robotic feeding system ‘roboTest F’ with a travelling axis plus a chain holding up to 100 specimen holders. • Industry Controller with test software testXpert ® and PI763 2.0210 automation software autoEdition2 PI763_roboTestF.pmd

Product Information Robotic Testing System ‘roboTest F’ (Clamp) for Rigid Specimens Technical Data Mechanics Mounting Capacity Dimensions1) (H x W x D) • 50 specimens • 100 specimens Weight 1) Coupled to the load frame 50 or 100 specimens max. 1680 x 500 x 1300 mm 1100...1500 x 500 x 1300 mm Approx. 150 kg (without specimen) Without materials testing machine Connected values Electrical connection Output Mains frequency Compressed air Required compressed air Easy manual testing by uncoupling the specimen feeding system with two screws 230/115 V 200 VA 50/60 Hz 6 bar 2 lpm Control Automation software...