Product Information Materials Testing Machines ProLine Z005 to Z100 ProLine Z050 TN with body-over-wedge grips, makroXtens P, and base option Our ProLine materials testing machines were primarily developed for the performance of standardized tests on materials and components. When combined with our intuitive testXpert III testing software, ProLine materials testing machines offer fast, easy operation. Advantages and features Integrated safety in accordance with the EC Machinery Directive Maximum level of safety for user and testing system is guaranteed. All EC Machinery Directive safety requirements are guaran‐ teed. Compliance is documented with an EC Declaration of Conformity. State-of-theart safety technology and proven industrial components that comply with the highest level of safety and industrial standards (IEC 60947) are used. ProLine Z010 TH with pneumatic grips Powerful drives • Extremely low minimum speeds can be set with simultaneous high speed-stability. In addition, the drive delivers high cross‐ head travel resolution. This is important, for example in the case of component testing with high demands on travel precision and tests on specimens with high stiffness and short test travel. • The high test-speed range can be used without restriction. In addition, test loads up to 110 % of machine nominal load are permissible to compensate for heavy combinations of test fixtures, accessories etc. • Faster return speeds mean reduced cycle times and increased test throughput. The motor employs zero-maintenance AC tech

Product Information Materials Testing Machines ProLine Z005 to Z100 High stiffness and precise crosshead guidance Two steel columns provide highly accurate guidance for ProLine's moving crosshead. The stiff load-frame profile and generous connecting surfaces reduce the inclination angle of the crosshead under load, enabling very precise alignment and application of force to the specimen. This is advantageous for flexure tests, compression tests, preci‐ sion tests on components etc. Safety for the entire testing system The highest level of safety is achieved with the two-channel safety circuit....

Product Information Materials Testing Machines ProLine Z005 to Z100 Flexibility Through Modularity testControl II offers six flexible timesynchronized slots. These make it possible to use multiple sensors at the same time, and can be monitored and protected irre‐ spective of use. • For example, an extensometer and a trans‐ verse strain extensometer can be used in addition to the load cell. • If the testing system is equipped with several load cells or additional sensors, these can all remain plugged in. All plugged-in sensors are automatically protected against overloads. Fast, adaptive drive...

Height of the test area without accessories Height of the test area without accessories Product Information Materials Testing Machines ProLine Z005 to Z100 Height of the test area without accessories All data at ambient temperature. Height of the test area without accessories Subject to change in the course of further development.

Technical dataGeneral technical data for ProLine Load frame Paint finish Ambient temperature Relative humidity (non-condensing) Drive Motor Motor holding brake Control, set value preselection Controller Cycle time Positioning repeatability (without reversing directions) Power input specifications Power supply Permissible voltage fluctuation Power frequency RAL 7021 black gray/stainless steel metallic, RAL 3031 orient red Digital (real-time Ethernet, EtherCAT®) Description ValueMachine electronics Number of available slots for measurement and control modules: Synchronized module slots 2 (expandable...

Product InformationMaterials Testing Machines ProLine Z005 to Z100 Z005, Z010 Type Z005 TN Test load Fmax 5 Test area Height, travel distance of the moving 10003) Load frame Height with leveling elements 1340 ... 1345 Width with machine electronics 917 Depth with machine electronics 439 With machine electronics, approx. 110 Average noise level at vmax measured 59 at 1 m distance from the front of the machine Crosshead speed vmjn ... vmax 0.0005 ... Crosshead return speed, max. 20004) Deviation from the set drive speed, max. 0.05 Drive travel resolution 0.0348 Power input specifications Power...

Product InformationMaterials Testing Machines ProLine Z005 to Z100 Z020; Z030; Z050; Z100 Type Z020 TN Z030 TN Test load Fmax 20 30 Test area Height, travel distance of the moving 9801) 12851) Load frame Height with leveling elements 1340 ... 1345 1743 ... 1748 Width with machine electronics 917 1000 Depth with machine electronics 439 462 With machine electronics, approx. 135 330 Average noise level at vmax measured 58 68 at 1 m distance from the front of the machine Crosshead speed vmjn ... vmax 0.0005 ... 500 0.0005 ... 300 Crosshead return speed, max. 7502) 500 Deviation from the set drive...