Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 PI 284 1123 CTA: 42569 42597 Applications The load frames of the AllroundLine table-top testing machines are used for almost all tests where low to medium specimen elongation occurs. One, or optionally two test areas are available. For applications outside of ambient temperature, the table-top testing machines can also be equipped with a temperature chamber. The table-top testing machines Z005 to Z150 are designed for quasi-static tests in tensile and compression directions, with continuous, static, pulsating or cyclic load. The drive is electromechanical. Advantages and features Integrated safety in accordance with the EC Machinery Directive Maximum level of safety for user and testing system is guaranteed. All EC Machinery Directive safety requirements are guaranteed. Compliance is documented with an EC Declaration of Conformity. State-of-the-art safety technology and proven industrial components that comply with the highest level of safety and industrial standards (IEC 60947) are used. Powerful AC Drive Technology The powerful and maintenance-free AC drive allows you to perform tests anytime at full test load and speed. Furthermore, reverse speeds far above the possible nominal speed. This is combined with an innovative motor feedback system, allowing excellent constant speed characteristics to be achieved even at extremely low speeds. High operating comfort • Ergonomic operation is the key feature of the new AllroundLine machine. • The machine is adjustable for optimum individualized ergonomic configuration; modular design allows adaptation as needed and when required. • Adjustable upright profiles combined with low base-height enable flexible variation of the working area. This also allows wheel-chair-friendly operation.

Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 High stiffness and precise crosshead guidance The stiff load-frame profile, generous connecting surfaces and ruggedly dimensioned components ensure high machine stiffness. The inclination angle of the crosshead under load is reduced, enabling very precise alignment and application of force to the specimen. This is advantageous for flexure tests, compression tests, precision tests on components etc. Ready for the Next Generation Modular design means that the testing system can be re-equipped or upgraded whenever required....

Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 Overview of the key advantages of testControl II machine electronics Innovative testControl II machine electronics All ZwickRoell materials testing machines are equipped with the powerful testControl II measurement and control electronics, offering the ideal basis for precise, reproducible test results. The electronics are mounted vertically on the side of the load frame. This position protects the electronics from penetration of liquids and conductive particles. The high-quality surfaces protect testControl II from external...

Scale diagrams Ergonomic remote control with color display Tests can be performed entirely via the display-equipped remote control, independent of the PC. All important information is shown on the color display. Machine operation is therefore more ergonomic and effective. Maximum operator safety is guaranteed with the integrated Emergency stop. The rocker-switch with integrated dial makes positioning fast yet highly accurate. All data at ambient temperature. Subject to change in the course of further development.

All data at ambient temperature. Subject to change in the course of further development.

Technical data General technical data for AllroundLine table-top testing machines Load frame Relative humidity (non-condensing) 20... 90 % Drive system Motor AC servo motor with concentrated windings, Hiperface® motor feedback system Control, set value preselection Digital (real-time Ethernet, EtherCAT®) Controller Adaptive Positioning repeatability (without reversal ±2.0 pm Power input specifications Permissible voltage fluctuation ±10 % Description Value Machine electronics Number of available slots for measurement and control modules: Synchronized module bus slots 2 (expandable to 5)1) Synchronized...

Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 Z005 TN, TH, TE TVpe Item No. Test load Fmax 5 Test area Lower test area 1030 Upper test area (additional crosshead 1015 required) Load frame Height with support legs Width Width with support legs Width with support legs and machine electronics Depth with machine electronics Depth with support legs and machine electronics With machine electronics, approx. With machine electronics and support legs, approx. Average noise level at vmax measured in 1 m distance to the front side of machine Drive system Crosshead speed vmjn......

Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 Z005 TNW, THW Test load Fmax Test area Lower test area 1000 Upper test area (additional crosshead 1015 Load frame Height with support legs 1538 ... 2118 Width with support legs 1056 Width with support legs and machine 1244 electronics Depth with machine electronics 5731) Depth with support legs and machine 690 electronics With machine electronics, approx. 208 With machine electronics and support 242 legs, approx. Average noise level at vmax measured in 67 1 m distance to the front side of machine mm/min mm/min % Of VaC(ua|...

Product InformationMaterials Testing Machines AllroundLine Z005 to Z100 Z010TN, TH, TE TVpe Item No. Test load Fmax Test area Lower test area Upper test area (additional crosshead required) Load frame Height with support legs Width Width with support legs Width with support legs and machine electronics Depth with machine electronics Depth with support legs and machine electronics With machine electronics, approx. With machine electronics and support legs, approx. Average noise level at vmax measured in 1 m distance to the front side of machine Drive system Crosshead speed vmjn... vmax Crosshead...