Group: Zwick Roell Group
Catalog excerpts
Product Information PrecisionLine Automatic testing machines for low loads PI 743 2.0712 Range of application The newgeneration springtesting instruments are suitable for use in both production lines and design and development and are used for testing compres sion springs and components. Very small springs used in powerful miniaturized mechanical and electromechanical assemblies can also be tested using the PrecisionLine Automatic. With the testControl measurement and control system and testXpert® II test software, the PrecisionLine Automatic is the ideal pre cision testing system for these applications. Standard interfaces enable connection of additional measuring devices such as dial gages, callipers, micrometers and sensors. Advantages/Characteristics • Extremely high measurement precision due to: Mechanical deformation compensation Direct load application and travel measurement in the test axis Extremely high frame stiffness Synchronous recording of force and spring travel • Excellent reproducibility through complete elimination of operator influence • Integrated mechanical overload protection for load cell • Useroriented testXpert® II software with options including statistical evaluation, quality control chart, central inspection plan management, barcode rea der connections and many others • testXpert® II’s archiving functions and open interfaces ensure optimum data traceability • PrecisionLine and its comprehensive selection of accessories and software products are developed and produced at Zwick Roell’s own production plant in Germany • All mechanical, electronic and software components are ideally matched, making PrecisionLine a product with the highest quality standards and allowing Zwick to offer the best possible service. • Inclusive protective screen Options • Interchangeable precision compression platens, diam. 36, 60, 100 mm (hardened steel or ground ceramic faces) • 200 N, 500 N or 2.5 kN load cells with deformation compensation • Compression die with diameter 2 mm and spherical surface
Open the catalog to page 1Product Information PrecisionLine Automatic testing machines for low loads Type Item number Load frame Stroke Testing area Weight (incl. compression platen, without electronics) Dimensions (width x height x depth) Ambient temperature Air humidity Conformity PLA 035451 70 mm max. 140 mm 33 kg 336 x 610 x 396 mm +10 ... +35 °C 20 ... 90 % to ISO 9000 and CE Measurement and control electronics Force measurement Stroke resolution Measurement range Real resolution in tensile/compression direction Test data group transmission rate to the PC Zeropoint correction Measurement signal runtime...
Open the catalog to page 2All ZwickRoell GmbH & Co. KG catalogs and technical brochures
-
Plastics & rubber
56 Pages
-
Extrusion plastometers
12 Pages
-
Image Brochure
20 Pages
Archived catalogs
-
Zwick/ZHU250
3 Pages
-
HC range
2 Pages
-
teachXpert Academia Package
2 Pages
-
Vibrophores 20-30 kN
2 Pages
-
Sheet forming 1000 kN
2 Pages
-
Creep Testing Kappa SS
4 Pages
-
Mflow Extrusion Plastometers
4 Pages
-
HDT/Vicat Allround_cool
2 Pages
-
Cflow Extrusion Plastometers
4 Pages
-
Specimen Grinder
2 Pages
-
Specimen blanking
3 Pages
-
DWT Pellini 550 and 1650
2 Pages
-
HIT pendulum impact testers
24 Pages
-
Hardness Testing with Zwick
24 Pages
-
Sheet forming 100/200 kN
2 Pages
-
TorsionLine 20 up to 500 Nm
2 Pages
-
TorsionLine 1000 bis 2000 Nm
2 Pages
-
roboTest P Metal
2 Pages
-
roboTest F_formstabil
2 Pages
-
roboTest A
2 Pages
-
Vibrophore HFP 5 and 10 kN
2 Pages
-
ProLine
2 Pages
-
testXpert II
20 Pages
-
Testing of plastics and rubber
68 Pages
-
HIT Pendulum Impact Testers
24 Pages
-
Hardness Testing with Zwick
36 Pages