Product InformationMaterials Testing Machines cLine Z005 and Z010 PI 880 925 CTA: 98096 64022 Applications The cLine product group features a test area which is open on three sides. cLine materials testing machines are ideal for component testing and for testing flexible foam materials. Component testing mainly involves flexible foam products such as mattresses and vehicle seats and upholstery. For materials testing, cubes or slabs of flexible foam are used. Compression tests, cyclic indentation tests and pulsating compressive strength tests (alternating load tests) are employed. Advantages and features Ergonomic operation Improved ergonomics due to side operation, swiveling table extensions on both sides, an additional single-sided table extension and an optional display-equipped remote control for set-up and operating modes. cLine, scale diagrams Standard-compliant positioning accuracy Standard-compliant positioning accuracy is reliably achieved. The corrected targets are approached using online correction performed automatically in the testXpert III testing software and the testControl II machine electronics. For the user this means greater accuracy in displacement measurement at specified loads. Powerful drives Extremely low minimum speeds can be set with simultaneous high speed-stability. while the zero-backlash ball-screw shaft delivers high crosshead travel resolution. The motor employs zero-maintenance AC technology. The high test-speed range can be used without restriction. Faster return speeds mean reduced cycle times and increased test throughput. a Stiff, robust machine frame The robust and stiff design of the C-shaped load frame enables high accuracy when measuring the deformation of flexible specimens. This allows the use of additional sensors to be avoided for many applications with the cLine.

Product Information Materials Testing Machines cLine Z005 and Z010 Compression die tools Compression dies are available in different diameters according to the requirements of standards of company specifications. Compression dies are circular flat, hemi‐ spherical or spherical. They are easy to install and change. Integration into production process cLine materials testing machines can option‐ ally be integrated into the production process, for example by means of roller conveyors in front of and behind the support table. Safety for the entire testing system The highest level of safety is achieved...

Product Information Materials Testing Machines cLine Z005 and Z010 System monitoring testControl II system monitoring provides the user/laboratory manager with detailed information on the current status and level of utilization of the testing equipment. This enables further increases in testing equip‐ ment availability and greatly simplifies main‐ tenance planning and spares/replacement procurement. Fast, adaptive drive controller The high drive control frequency of 1,000 Hz delivers fast, precise force and strain control. Benefits include enabling components to be loaded very quickly and accurately...

Product InformationMaterials Testing Machines cLine Z005 and Z010 Technical dataType Item No. Test load Fmax Test area Height Depth with folded table extensions Depth with raised table extensions Travel s of the moving crosshead, max. Load frame Dimensions Width with machine electronics Depth with support legs and folded table extensions Depth with support legs and raised table extensions Weight With machine electronics, approx. Paint finish Ambient temperature Relative humidity (non-condensing) Average noise level at vmax measured at 1 m distance from the front of the Drive Motor Motor holding...

Description Value Machine electronics Number of available slots for measurement and control modules: Synchronized module slots 2 (expandable to 5)1 Synchronized PCIe slots 1 Force measurement Class 0.5/1, depending on load cell, compliant to Measurement range Calculated resolution (e.g., load cell in tensile/compression direction) Effective resolution in tensile/compression direction: DCSC module USC module Measured value acquisition rate Measured value transmission rate to PC Zero-point correction Measurement signal runtime correction 19 bits (corresponds to ±524,000 points) 20 bits (corresponds...