PROCESS SOLUTIONS | FRUIT TREATMENT LINE SELECTION, WASHING, DRYING, CALIBRATION Z450 Fruit treatment line for our Z450 citrus fruit extractor for up to 3 Tons/h with fruit calibration. It is comprised of selection, brush washer, drying and calibration line, connected by conveyor elements and made of AISI 304 stainless steel. TECHNICAL CHARACTERISTICS Bucket elevator to transport fruit to the calibration table, including intake hopper. CONTROL PANEL CALIBRATION LINE It has a programmable IP65 control panel with speed regulator to control motors by means of frequency converter, luminous and acoustic emergency signals, with two independent emergency pushbuttons. Fruit boxing table supplied by roller calibrator, to separate the fruit into 3 diameter ranges (55-70 mm, 70-85 mm and 85-100 mm in agreement with the juice extraction kits of our Z450), and an outlet for fruit with diameters of more than 100 mm. The calibration belt is tilted and measures 6000 mm long. It has 3 rollers than can easily be adjusted in height, to regulate the distance between the roller and the belt, and permit the passage of desired diameters. It has 4 fruit collection trays, covered with soft plastic so that the fruit is not damaged. It has 4 hatches to box the fruit and to support the boxes. BRUSH WASHER AND DRYING Brush washer with three independent areas: washing, rinsing and drying. Comprised of 15 rows of nylon brushes with push system, 4 shower lines (two for detergent and 2 for rinsing), including detergent dispensing pumps and a drying area with 2 fans. The roller rotation speed (brushing function) is controlled by means of speed converter. FRUIT SELECTION Aluminium roller conveyor for fruit selection and removal of damaged fruit. Comprised of area for tipping boxes and selection area with speed adjustment to adjust selection capacity. FOOD ENGINEERING