SWISS PRIME MEASURING SINCE 1957 Economic Processor for Measurement, Data Acquisition, Control and Display of: • Diameter / Ovality • Eccentricity / Diameter

The USYS®-Touch has been developed for use with a single sensor such as ODAC® for diameter, ODEX® for non-contact eccenctricity/concentricity/diameter or CAPAC® for capacitance measurement. It uses the same technological platform that has been proven with the multi-sensor USYS® processors, however, supporting one measuring point only allows for a very cost effective and compact solution. Fault detectors such as KW lump/neckdown units and Spark Testers, as well as a proximity switch for length information can also be connected. The processor communicates with a Host and can be integrated into...

FOR THE WIRE, CABLE, PLASTICS AND RUBBER INDUSTRIES AND SIMILAR Typical Application Configurations: Diameter Measurement and Additional Input from Spark Tester and Lump / Neckdown Detector. Speed or extruder screw rpm and full measuring value and fault report. Diameter measurement and data collection for complete production runs. Diameter/Eccentricity Measurement and Additional Input from Spark Tester and Lump/Neckdown Detector. Diameter and eccentricity measurement with data collection and fault report. Capacitance Measurement and Additional Input from Spark Tester and Lump / Neckdown Detector....

REAR PANEL FEATURES 2 x USB ports COM connections RS serial port 2x Ethernet ports for networking and data collection Mains switch Mains connector Integrated connector with mains filter HDMI output Ground connection Connection strips For inputs/outputs such as relays, analog outputs, control inputs etc. Measuring head connector LEMO connector for any digital ODAC® J or CAPAC® J sensor (not available when an ODEX® system is connected). space for cables and connectors Platz für Kabel und Stecker espace pour câbles et connecteurs Option: USY.003.9010 19" rack mount kit 19"-Rack Montagesatz 19" rack...