Economic Processor for Measurement, Data Acquisition, Control and Display of: • Diameter / Ovality • Eccentricity / Diameter

_ THE COST EFFECTIVE BUT POWERFUL PROCESSOR_ The USYS® 200 has been developed for use with a single sensor such as ODAC® for diameter, ODEX® for concentricity/ diameter or CAPAC® for capacitance measurement. It uses the same technological platform that has been proven with the multi-sensor USYS® processors, however, supporting one measuring point only makes the price of the USYS® 200 substantially lower. Fault detectors such as KW lump / neckdown units and Spark Testers, as well as a proximity switch for length information can also be connected. The processor communicates with a Host and can...

FOR THE WIRE, CABLE, PLASTICS AND RUBBER INDUSTRIES AND SIMILAR Typical Application Configurations: Diameter Measurement and Additional Input from Spark Tester and Lump / Neckdown Detector. Automatic diameter control through capstan speed or extruder screw rpm and full measuring value and fault report. Capacitance Measurement and Additional Input from Spark Tester and Lump / Neckdown Detector. Select capacitance as the most important parameter to control, e.g. for data cables. FOR THE STEEL INDUSTRY The USYS® 200 is available with special "Bar" Software. This feature makes it suitable for non-continuous...

FRONT PANEL FEATURES Navigate with the cursor to view the Max., Min., Average etc. of monitored characteristic (WITH DISPLAY OF AN EXTRUSION LINE WITH 1 ODAC® AND 1 SPARK TESTER) 6.4" LCD TFT color screen with protection glass Context specific function keys Navigation and cursor keypads Numeric keypad Value of characteristic being monitored / controlled Relevant characteristic status and value displayed in these windows Direct access function keys Power on / off switch with LED Depiction of the line layout (user configurable) Change menu key Switch between operator mode and configuration mode...