UMAC® CI
2Pages

Catalog excerpts

High-Tech Measured Value Processors for Ultrasonic Wall Thickness Measurement Flexible and powerful wall thickness and concentricity measuring solution The newest UMAC CI processor generation, developed and manufactured by Zumbach, is a compact, hightech wall thickness data acquisition system that comprises of a processor unit and an associated sensor. The system is intended for use in extrusion lines for measuring and logging wall thickness, eccentricity/ concentricity and other relevant parameters. Newest measuring algorithms allow the users an easy integration and setup. The system itself contains a visualisation of the measurements via the embedded Webserver access. Webserver screen The measurements can be transferred by Profinet IO, Ethernet TCP/IP, EtherNet/IP, OPC UA or RS communication. Additionally, the well-known WALLMASTER solutions are still available too. Offering with the USYS IPCe processors and HMI software the setup for combining the ultrasonic measurement with additional sensors from Zumbach such as ODAC® laser diameter and ovality gauges, KW lump and neckdown detectors, Sparktester or speed and length gauges. Option: Display unit VISU-Touch Host computer

Open the catalog to page 1

Technical data Wall thickness Range 0.08 mm up to 99.95 mm (.003 ... 4 in.), depending on product Energy supply Mains voltage 100 – 240 VAC, operating range: 85 – 264 VAC typical Mains frequency 50 / 60 Hz, operating range: 47 – 63 Hz Power consumption 25 – 35 W typical Current consumption 1.8 A max. Fuses 2 fuses inside the appliance inlet: 3.15 A time-lag T, 250 VAC, 5 x 20 mm Environmental conditions Area of application Indoor use, dry locations only Case IP 42 when vertical mounted with front panel downward (protected against objects with > 1 mm Ingress protection diameter, protected...

Open the catalog to page 2

UMAC® CI 2Pages

Catalog excerpts

All ZUMBACH Electronic AG catalogs and technical brochures

UMAC® CI
2Pages