Catalogs >
ZUMBACH Electronic AG >
STEELMASTER SMR 230-400

STEELMASTER SMR 230-400
6Pages

Catalog excerpts

The Revolutionary Modular Rotating Gauges With Large Measuring Fields. For Hot and Cold Rolling Mills & Quality Control. SMR 230/400 is part of the STEELMASTER family with SMS, SMO & SMR

Open the catalog to page 1

GENERAL The rotating SMR 230/400 gauges from ZUMBACH are a new generation and concept of optical gauges for hot rolled rod and bar as well as for Quality Control. They bring completely new possibilities and solutions with high measuring performance. This new product line supplement the over years field tested line of SMR 100/160 models. SMR gauges are mechanically simple and very robust. Outstanding Advantages • Large measuring field of up to 400 mm (15.75 in.) • Wide measuring range from 1 up to 370 mm (.04 up to 14.5 in.) • Extremely fast: Up to 6000 measurements/s • Rotates at high speed...

Open the catalog to page 2

BASIC CONCEPT The mechanical concept and the basic elements are mostly the same as in the well proven oscillating gauges of the SMO series. Instead of power and signal transmission by a special cable solution, everything is now transmitted totally without contact. The new rotating SMR 230/400 models can be fitted with up to 4 laser heads, operating in 2-axis or 3-axis configuration. A full profile is generated after only 90 or 60 degrees respectively of the rotation. This means up to 6 full profiles/s. For non-round bars such as squares, hexagons, flats etc., the optional PROFILE software...

Open the catalog to page 3

BASIC SYSTEM COMPONENTS Measuring Unit with ODAC® Diameter Measuring Heads A robust, welded structure ensures protection of the laser heads against dust, scale, splashes and heat. • Drive system for up to 60 rpm • Fully contact-free power and signal transmission • Easy exchangeable protection glasses • Temperature control system • Diagnostic outputs for checking the video signals • Cooling for OD's up to approx. 30 mm (1.2 in.) by air only. Over 30 mm (1.2 in.) additional water cooling is required. ODAC® 160/230 high-tech laser measuring heads (inside the measuring unit) • 1 emitter + 1...

Open the catalog to page 4

STEELMASTER SOFTWARE Basic Software Package The basic package features all functions for round products: • Start and end suppression • Calculation of diameters, height, width, diagonals • Display of mean value, min., max., ovality • Hot and / or cold values • Min. / max. alarms • Head and tail scrap length indication • Personalized screens • Statistics, printed reports • Optional software extensions • 10 major languages; others on request • Section, trend screens • Split screens (MULTIGAUGE) • Configuration, calibration screens Optional Software Packages Besides the basic package,...

Open the catalog to page 5

Connection elements and blower air intake are mountable on both sides Laser beam Heat protection Emergency stop Recommended product direction Grease nipple Mains connection Signals Air from blower unit 15 Water cooling tube Service access CAUTION: – Product guides must not be fixed on the measuring unit! MAIN DATA Models STEELMASTER SMR 230/400 (see also page "GAUGE VERSIONS) Assembly versions (ODAC heads) 1...3 ODAC 230 1 ODAC 230 / 2 ODAC 160 2 ODAC 160 / 4 ODAC 160 Measuring fields 0...230 mm (0...9.05 in.) 0...400 mm (0...15.75 in.) 80...400 mm (3.15...15.75 in.) Product diameter 1)...

Open the catalog to page 6