Catalogs >
ZUMBACH Electronic AG >
SPS 50/80/100/150

SPS 50/80/100/150
4Pages

Catalog excerpts

In-Line Profile Measurement Systems for Hot / Cold Steel Applications

TECHNOLOGY The PROFILEMASTER SPS system is based on the laser triangulation principle using four up to eight light-section sensors. Each sensor consists of a laser transmitter and an industrial CMOS camera. The sensors are arranged in an octagonal metrology to obtain complete information about the product shape. The optics of the point laser emitter contain a cylindrical lens that generates a line. The CMOS cameras extract the position of the laser line internally using a peak detection algorithm, resulting in a sub-pixel resolution that enables high acquisition speeds. Thanks to its unique...

Open the catalog to page 2

IN-LINE REBAR MEASUREMENT Our Rebar Software option allows the measurement of the characteristic dimensions of a Rebar product. It works within the standard PROFILEMASTER software during in-line production (hot or cold). The rebar algorithm generates a section profile consisting of an inner and an outer contour on which measurements can be applied: This process is repeated all along the bar. The characteristics can be plotted as a function of the length as strip charts. The following example shows the rib height (mm/in.) along the product length (m/in.): The results can be stored in the...

Open the catalog to page 3

MEASURING FUNCTIONS DIMENSIONS SPS SYSTEM 116 Connectors Product direction Laser beam Measuring plane Connections for: - blower air - chiller Connections for: - cooling water - compressed air Attention: Product guides must not be fixed on the measuring unit Model PROFILEMASTER Number of cameras Measuring field Largest product dimensions (depends on worst case off-centre position) Min. object diameter Scanning frequency Display resolution Repeatability (1 σ) Accuracy, typically within Product temperature Ambient temperature SPS 100-Sx 4...8 ø 80 mm (3.15 in.) ø 100 mm (3.94 in.) Round: ø 72...

Open the catalog to page 4