Catalogs >
ZUMBACH Electronic AG >
QC Dimension Measuring Device

QC Dimension Measuring Device
2Pages

Catalog excerpts

Automatic Off-line Measuring Station for the Outside Diameter and Ovality Measurement of Wire, Cable or Tube Samples. QC 2 The QC 2 system consists of a high precision diameter measuring head, a motorized rotating sample holder with automatic sample ejection and a processor unit USYS 20 with special software evaluating the captured values. The system provides fast and accurate measurements of manufactured parts or cut samples. QC 2 can be used either in quality control (QC) laboratories or on factory floors. It provides operators a simple and repeatable solution for parts measurement and immediate notification of meeting specification within given tolerances. Unlike other micrometers or mechanical indicators that can give errors due to poor zero setting, end play, calibration or are sensitive to user input, QC 2 provides repetabale measurements regardless the operator. Video available of rotary motion QC 2 Advantages and Benefits • Accurate and easy to use measurement method. • Quick feedback for production optimisation. • Quick sample positionning thanks to the special designed rotating holder. The mounting fixture ensures the test piece is always properly positioned within the gauge. • Automatic rotation and measurement start by single key press. • Automatic sample ejection for products up to 5 mm (.2 in.); manual removal for sample up to 18 mm (.7 in.). Sample length = 40...50 mm (1.57...1.97 in.) • The operator is free to make as many measurements around the circumference of the sample as desired. Simple statistics of the resultant values will be computed. • By simply pressing one key the min., max., average and standard deviation of the samples measurements are calculated and are available to printout. • The calculated values can be uploaded to a host computer for furthe

Open the catalog to page 1

Technical Data Measuring Head ODAC 60J Diameter range 0.25...5 mm (.01... .2 in.) with automatic sample ejection 5...18 mm (.2... .7 in.) with manual sample removal Repeatability +/- 0.25 µm (+/- .0000098 in.) Scan rate 1000/s (option 2000/s) Scanning speed 157 m/s (option: 315.4 m/s) Light source Visible laser diode, class II Protection class IP 65 Processor USYS 20 Display • High contrast 4.2" LCD monochrome screen 240 x 128 pixels. Selectable resolution of up to 0.0001 mm (.000004 in.) of actual outside, minimum, maximum and average diameter. • 6 bright LED alarm displays (tolerance,...

Open the catalog to page 2

QC Dimension Measuring Device 2Pages

Catalog excerpts

All ZUMBACH Electronic AG catalogs and technical brochures

QC Dimension Measuring Device
2Pages