SWISS PRIME MEASURING SINCE 1957 Automatic Off-line Measuring Station for Outside Diameter and Ovality Measurement of Wire, Cable or Tube Samples. The QC 2 system consists of a high precision diameter measuring head, a motorized rotating sample holder and a processor USYS-Touch with special software evaluating the captured values. The system provides fast and accurate measurements of manufactured parts or cut samples. QC 2 can be used either in quality control (QC) laboratories or on factory floors. It provides operators a simple and repeatable solution for parts measurement and immediate notification of meeting specification within given tolerances. Unlike other micrometers or mechanical indicators that can give errors due to poor zero setting, end play, calibration or are sensitive to user input, QC 2 provides repetabale measurements regardless the operator. QC 2 Advantages and Benefits • Accurate and easy to use measurement method. • Quick feedback for production optimisation. • Quick sample positionning thanks to the special designed rotating holder. The mounting fixture ensures the test piece is always properly positioned within the gauge. • Automatic rotation and measurement start by single key press. • The operator is free to make as many measurements around the circumference of the sample as desired. Simple statistics of the resultant values will be computed. • By simply pressing one key the min., max., average and standard deviation of the samples measurements are calculated and are available to printout. • The calculated values can be uploaded to a host computer for further processing.

• Technical specifications are subject to change without notice Measuring Head ODAC 16J ► For other ODAC types, please contact Zumbach Electronic AG Switzerland (H.Q.): ZUMBACH Electronic AG, P.O. Box, CH-2552 Orpund, Phone +41(0)32 356 04 00, Fax +41(0)32 356 04 30, E-Mail: [email protected] Switzerland • Belgium • China • France • Germany • India • Italy • Spain • Taiwan • United Kingdom • USA