ODAC® 64XY
4Pages

Catalog excerpts

Extremely Fast and Accurate Laser Diameter Measuring Head. Dual-Axis (XY), with 64 mm (2.52 in.) Measuring Field. ODAC® 64XY Display unit (option): VISU-Touch or LOC 01 Modern two axis measuring head from the ODAC® laser measuring unit series. Highest accuracy, robustness, reliability and functionality distinguish all the laser measuring heads from ZUMBACH. Thanks to the compact design, the ODAC® 64XY measuring heads can be used in virtually every manufacturing process in the wire and cable industry, the plastics and rubber industry as well as the steel and metal industry. Known for precision, quality and ease of use the laser measuring heads from ZUMBACH are among the best of their class. The technological basis considered for these measuring heads is always of the latest cutting edge technology, with laser diodes as light sources combined with intelligent and powerful measured-value processors which facilitate a simple and flexible integration. Our long-standing experience as a pioneer of in-line measuring technology, combined with high production figures result in a product with an excellent priceperformance ratio. Amongst the outstanding features are features such as single scan calibration (CSS), single scan monitoring and high data rate output of up to 300* data packages per second. The measuring heads can be used with all line speeds. Vibrations during production have no noticeable influence on measurements. Adaptive signal processing in the measuring units increase accuracy All the measuring heads of the ODAC® series have adaptive signal processing (patent DE3111356), which makes subsequent regular re-calibrations superfluous. Only in instances of component exchange or compliance to calibration regulations ISO 9000/9001 etc. would recalibration be required. Main Advantages • Very high scan rate (measuring frequency) Standard: 2 x 1200/s, Version F: 2 x 2500/s • High precision measurement • High insensitivity to dirt and dust • Easily removable splash guards (snap in/out) Flexible communication integration • RS (-232 /-422 /-485) • PN (Profinet IO V2.3) • DP (Profibus DP) • EI (EtherNet/IP) • EN (Ethernet TCP/IP) • J (digital, for connection to USYS processors) All the relevant parameters for accuracy are continuously monitored by the measuring system and automatically compensated. This is valid in particular also for possible long-term changes of the behaviour of the scanner motor or the measuring electronics. * Depending on the measuring head model, the number of transmitted measured values as well as the baud rate of the interface. Di

Open the catalog to page 1

System Overviews ODAC® 64XY-EN-RS (serial interface) Option: Local display LOC 01 Host RS-232 /-422 /-485 More applications with RS-485 interface and ANSI protocol Option: Analogue interface Digital input for length detector Service Ethernet TCP/IP The built-in processor allows the acquisition and monitoring of the measured values, as well as statistic functions, parameter selection and many other functions. The RS version communicates via the integrated RS interface with a higher level system, like USYS from Zumbach, Host Option: Display unit VISU-Touch computer (or PLC). The Zumbach...

Open the catalog to page 2

Accessories DescriptionOrder Number DescriptionOrder Number Protects the front side of the measuring head from heat radiation. For a continuos adjustment of the inclination of both measuring axes according to the horizontal and vertical. Adjustment range + 67.5°/-22.5°. Only for ODAC J versions. Floor stand ST1-DVW 1 (horizontal) Floor stand ST1-DVW 1 45˚ Vertically adjustable. Protects the back side of the measuring head from heat radiation. This air curtain, supplied with compressed air, is used instead of the standard installed splash guards. The air curtain protects the measuring...

Open the catalog to page 3

• Technical specifications are subject to change without notice 11 M stands for measuring field height. In practice, the largest object diameter corresponds to Measuring Field Height minus instability of position. 2) System resolution is the smallest practical value on the last digit of the display. 3) Measured in the measuring plane, incl. lateral Jitter of the scans. 4) Maximum power of the laser can be read on the warning label. 5) The xxN-F versions (Narrow beam) is recommended in case of products with very uneven surfaces, for the contour measurement and detection of surface defects,...

Open the catalog to page 4

ODAC® 64XY 4Pages

Catalog excerpts

All ZUMBACH Electronic AG catalogs and technical brochures

ODAC® 64XY
4Pages