Catalogs >
ZUMBACH Electronic AG >
ODAC® 2J/16J

ODAC® 2J/16J
4Pages

Catalog excerpts

Low-Cost, Super Compact VLD Laser Measuring Heads for Diameter and Width Measurement. The casting design and insensitivity to industrial pollution guarantee that ODAC® 2J / 16J operate trouble free even under the most hostile industrial conditions, which brings it ahead of its competitors. It is permanently calibrated for highest accuracy and stability. ODAC® 2J / 16J are able to measure all materials and products and does not mind whether they are opaque or transparent. It is the best low-cost and technical solution for measuring on-line and off-line processes such as drawing, extruding, grinding, polishing, measuring samples (quality control) and many more. Main Advantages • Astonishingly low-priced, achieved through High Volume Production • Very high tolerance to hostile conditions • All products and materials • For fine wire and fibres from 0.012 mm (.005 in.) up • Extremely long-lived • Can be installed anywhere, in any position Practically all USYS processors and CI computer interfaces can work with ODAC® 2J / 16J to fulfil numerous functions such as: DimenSionS • Product parameter library • Storage of min./max. value • Closed loop process control • Statistical reel report • Real-time SPC charts • Measurement and control of: - Outer diameter - Inner diameter - Wall thickness • Ready for computer networking

Open the catalog to page 1

Technical Data Model 11 M stands for measuring field height. In practice, the largest object diameter corresponds to measuring field height minus instability of position. 2) System resolution is the smallest practical value on the last digit of the display. 3) Scanning frequency 480 scans/s only with measured object diameter larger than 0.1 mm (.004 in.) 4) Maximum power of the laser can be read on the warning label.

Open the catalog to page 2

Accessories Description Order number Floor stand ST2-ODAC16 Vertically adjustable. Line height (H): 880...1220 mm (34.7...48 in.) ODAC 2J Set of calibration standards ODAC 2 For VR1M guide. Delivered in a protection box, comprising: – Calibration standard ø 0.05 mm – Calibration standard ø 0.5 mm – Certificate Other calibration standards on request. Floor stand ST2-ODAC16 Vertically adjustable with 45° tilt. Line height (H): 880...1220 mm (34.7...48 in.) ODAC 2J Rotary holder USYS 20 Fixation set for wall mounting (with pivot arm) USY.0002.920 Fixation set for table top USYS 20 Air curtain...

Open the catalog to page 3

Order number Guide VF16-ODAC16 With ceramic rollers (V shape) for measured object diameter up to 16 mm (.64 in.). ODAC 2J Guide VR1M-ODAC16 With ceramic rollers (V shape) for measured object diameters up to 1 mm (.04 in.). Limiting socket FF16-ODAC16 Used as a device to delimit the measuring field. It has no guiding function. ODAC 2J ODAC.161.420 Guide FRG6B-ODAC16 With flat ceramic rollers and counter rollers. Used for the precise guiding of flat profiles, having a border length of up to max. 6 mm (.24 in.). Guide FR4B-ODAC16 4 mm ODAC.161.440-04 Guide FR6B-ODAC16 6 mm ODAC.161.440-06 With...

Open the catalog to page 4

ODAC® 2J/16J 4Pages

Catalog excerpts

All ZUMBACH Electronic AG catalogs and technical brochures

ODAC® 2J/16J
4Pages