ODAC® 230
4Pages

Modular Single Axis Laser Measuring Head for Diameter, Width, Height. Measuring Field = 230 mm (9.05 in.). ODAC® 230 Modern single axis measuring head from the ODAC® laser measuring unit series. Highest accuracy, robustness, reliability and functionality distinguish all the laser heads from ZUMBACH. The ODAC® 230 is manufactured with a modular design. It is available with a support rail or as individual emitter and receiver parts when a maximum of flexibility is required to install the head in any position. The measuring head can also be installed in constricted confines or several emitter/ receiver pairs can be mounted in the same plane. ODAC® 230 models can be used in virtually every manufacturing process in the wire and cable industry, the plastics and rubber industry as well as the steel and metal industry. Known for precision, quality and ease of use the laser measuring heads from ZUMBACH are among the best of their class. The technological basis considered for these measuring heads is always of the latest cutting edge technology, with laser diodes as light sources combined with intelligent and powerful measured-value processors which facilitate a simple and flexible integration. Our long-standing experience as a pioneer of in-line measuring technology, combined with high production figures result in a product with an excellent priceperformance ratio. Amongst the outstanding features are features such as single scan calibration (CSS), single scan monitoring and high data rate output of up to 333* data packages per second. The measuring heads can be used with all line speeds. Vibrations during production have no noticeable influence on measurements. * Depending on the measuring head model, the number of transmitted measured values as well as the baud rate of the interface. Adaptive signal processing in the measuring units increase accuracy All the measuring heads of the ODAC® series have adaptive signal processing (patent DE3111356), which makes subsequent regular re-calibrations superfluous. Only in instances of component exchange or compliance to calibration regulations ISO 9001 etc. would re-calibration be required. All the relevant parameters for accuracy are continuously monitored by the measuring system and automatically compensated. This is valid in particular also for possible longterm changes of the behaviour of the scanner motor or the measuring electronics. Flexible communication integration • RS (-232 /-422 /-485) • PN (Profinet IO V2.3) • DP (Profibus DP) • EI (EtherNet/IP) • EN (Ethernet TCP/IP) • J (digital, for connection to USYS processors) Main advantages • Very high scan rate (measuring frequency) Standard: 1000/s, Version F: 2000/s • High precision measurement • High insensitivity to dirt and dust Flexible mounting With or without rail, different measuring distances Types of measurement 1 Diameter 6 Dual scanning with large measuring field (synchronized) 3 Penetration depth 7 Dual scanning XY (synchronized) 4 Height 8 Triple scanning TRIO (synchronized) Other types of measurement on request Special applications Measurement of hot steel ► sk for special data sheets A on STEELMA

System Overviews ODAC® 230EN-RS (serial interface) Option: Local display LOC 01 Host RS-232 /-422 /-485 or More applications with RS-485 interface and ANSI protocol Option: Analogue interface Digital input for length detector Service Ethernet TCP/IP The built-in processor allows the acquisition and filtering of the measured values, as well as statistic functions, parameter selection and many other functions. The RS version communicates via the integrated Option: Display unit VISU-Touch RS interface with a higher level system, like USYS from ZUMBACH, host computer (or PLC). The ZUMBACH...

Ethernet cable Order Number USYS 20 Rotary holder Ethernet network cable cat. 6 S/FTP with RJ45 connectors. (XXX in the order number stands for: x 0.1 m, e.g. A15 608 8025 stands for 25 x 0.1 m and thus a cable that is 2.5 m long). Not for ODAC J versions. USYS 20 Fixation set for wall mounting Power over Ethernet supply for devices that do not support PoE or a long Ethernet cable. Not for ODAC J versions. USYS 20 Fixation set for table top Set of calibration standards Interface with 4 analogue, 5 digital and 2 relay outputs. Direct connection of the digital input (proximity switch). Not...

Technical Data J EN-xx Model ODAC 230 Measurement Version Measuring field M 1) Min. object ø Scanning frequency scans/s Scanning speed Width of laser beam 6) Repeatability (3 σ) at measuring distance D and averaging time (s) Measurement error centric at measuring distance D 2) Measurement error within the measuring zone 3) Measuring zone (width x height) Resolution 4) Light source 5) Types of meas. (see page 1) Interfaces / Connections Model ODAC 230 Interface Service Interface Host Data rate max. standard Data rate max. F version Data rate max. C version Interface LOC Indicates traffic Jx...