Easy • Precise • Instant OD / ID / WALL Measurement System for Off-line Use • Medical tubing • Packaging tubing • Shrink tubing • Rubber tubing • Small Pipe and more Within seconds, GaugePro provides you with: - Wall Thickness (measured at 4 or 8 points) average / minimum / maximum - Inner Diameter (average) - Outer Diameter (average) 11 values are derived carefully from 4 simultaneous measurements or computed with an accuracy and a repeatability which cannot be achieved on soft or semirigid material with conventional contact measuring systems such as micrometers, dial gauges or calipers. For increased coverage of the product circumference, GaugePro features an eight point wall thickness measurement mode. GaugePro is a true non-contact measurement without deformation of the specimen under test. The system features a unique self-calibration algorithm. Simple sample preparation and easy loading of the gauge yields a QC productivity level never achieved before.

1. Select product2. Insert sample 3. Accept measurements GaugePro measures most materials Impartial precision measurements:incl. plastics, rubber, metal and more Easy - Fast - Simple - Dependable Main Data * Smaller and larger dimensions possible, depending on material • Technical specifications are subject to change without notice ** For 3 Sigma with 1 second averaging *** GaugePro 22 can be configured for two ranges by moving the transducers between two positions Switzerland (H.Q.): ZUMBACH Electronic AG, P.O. Box, CH-2552 Orpund, Phone +41(0)32 356 04 00, Fax +41(0)32 356 04 30, E-Mail: [email protected]...