SZE3 modular cabinets
20Pages

INDUSTRIAL ENCLOSURES MODULAR CABINETS Versatile bolted enclosure for indoor applications both in automation and power industry, for installing various devices on a mounting plate or an internal rack. The cabinet has a frame structure, based on closed profiles, perforated in two planes. This gives unlimited possibilities for interior installation and allows to easily connect cabinets in series. SZE3 cabinet comes in 48 varieties of sizes. For more information please contact our Sales Department to choose the suitable for your need. Other untypical dimensions are also possible. SZE3 cabinets...

INDUSTRIAL ENCLOSURES MODULAR CABINETS CABINET DESIGN Screwed framework of the cabinet Closed-profile bolted design for high rigidity. Shape of the profiles ensures full symmetry of the cabinet frame, allowing doors and panels to be installed on either side plane. Each profile has a perforation with pitch of 25 mm on two planes, which makes the interior highly configurable. The material used gives increased corrosion resistance and simple galvanic connection of unpainted parts that are attached directly to the frame. In this way there is a possibility to avoid any additional ground...

INDUSTRIAL ENCLOSURES MODULAR CABINETS SZE2 cabinet 800 mm wide, without side panels, intended for baying in rows REFERENCE CHART - cabinets with a width of W = 600 mm Dimensions of cabinet’s frame [mm] Dimensions of mounting plate [mm] Height H Width W Depth D Height HP Width WP Package Supplementary accessories** Catalogue numbers Side panels Mounting plates infill 19" symmetrical swing frame Earthing bar Potential equalisation bar REFERENCE CHART - cabinets with a width of W = 800 mm Dimensions of cabinet’s frame [mm] Dimensions of mounting plate [mm] Height H Width W Depth D Height HP...

INDUSTRIAL ENCLOSURES MODULAR CABINETS Side view Front view (cabinet with single-wing door) Side view Mounting plate (cabinet without side panels) (cabinet with side panel) Industrial enclosures

INDUSTRIAL ENCLOSURES MODULAR CABINETS SZE2 cabinet 1200 mm wide, without side panels, intended for baying in rows REFERENCE CHART - cabinets with a width of W = 1000 mm Dimensions of cabinet’s frame [mm] Dimensions of mounting plate [mm] Height H Width W Depth D Height HP Width WP Package Supplementary accessories** Catalogue numbers Side panels Mounting plates infill 19" symmetrical swing frame Earthing bar Potential equalisation bar REFERENCE CHART - cabinets with a width of W = 1200 mm Dimensions of cabinet’s frame [mm] Dimensions of mounting plate [mm] Height H Width W Depth D Height...

INDUSTRIAL ENCLOSURES MODULAR CABINETS Side view Front view Side view (cabinet with double-wing door) Mounting plate (cabinet without side panels) (cabinet with side panel) Industrial enclosures

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets DOORS Doors SZE3 cabinets have solid metal door as standard. If required, the door can be glazed and/or ventilated. The door can be mounted not only on the cabinet’s front and back but also on its sides. Tightness is ensured by a seal cast of foamed polyurethane. The door has M8 earthing bolts. A standard cabinet has a four-point lock with doppelbart insert and no handle. The lock is located outside the sealed zone, so it does not compromise protection degree IP. Maximum door opening angle: 150° At the customer’s request we can introduce...

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets DOORS Double-wing door For cabinet width [mm] Door dimensions Industrial enclosures

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets SIDE PANELS • LIFTING ACCESSORIES Side panels Panels are bolted to the frame with intermediate elements that position the panel in the frame. All panels are fitted with seals cast of polyurethane foam, and M8 stud bolts for mounting earthing wires. If requested, the side panels can have holes for air vents, fans, heat exchangers and air conditioners. Material: Sheet steel powder painted in light grey (RAL 7035) Scope of delivery: Set of 2 side panels with fixing accessories for mounting into the cabinet. For cabinet Catalogue number...

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets CABINET‘S BASE Modular plinth It consists of 4 corners and 4 or 8 removable side panels. Total weight of the cabinet is carried by plinth corners. It is possible to reach the area under the cabinet by unscrewing the side panels. Plinth can be mounted to the base by optionally using 4 rubber vibro-shock absorbers. Ordering method: Plinth includes the following elements: plinth corners with appropriate plinth side panels depending on the cabinet’s width and depth. Plinth side panels There are three types of plinth side panels available - see...

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets CABINET‘S BASE Plinth corners Available in two heights. Material: sheet steel powder painted in light grey (RAL 7035). Scope of delivery: Set of 4 corners include fixing accessories for assembling a plinth to the cabinet. Height [mm] 200 100 Vibro-shock absorbers The simple plinths can be optionally equipped with vibroshock absorbers. Plinth with vibro-shock absorbers should be fixed into the room’s floor. Four vibro-shock absorbers are needed for one plinth. Material: 10 mm thick rubber Vibro-shock absorber Scope of delivery: Vibro-shock...

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets MOUNTING PLATE Mounting plate The mounting plate is designed for installing different equipment inside the SZE3 cabinet. Detailed dimensions of the mounting plates are given in the drawing on pages 4-7. Material: Galvanized steel sheet, 3 mm thickness Scope of delivery: Mounting plate with fixing accessories for smooth adjustment within the cabinet’s depth. Mounting plate guides are sold separately. In order to fasten the mounting plate on the back of the cabinet, between the rear posts of the frame, requires two additional lower brackets,...

INDUSTRIAL ENCLOSURES Accessories for SZE3 cabinets MOUNTING PLATE Mounting plate brackets For fastening the mounting plate on the back of the closet, between the rear posts of the frame. Material: Al-Zn-coated steel sheet Scope of delivery: Two brackets (right and left) with fixing accessories. Package Mounting plate fastened on the back of the cabinet, between the frame posts Industrial enclosures Catalogue number