INDUSTRIAL ENCLOSURES

ZPAS Milestones – 47 years of experience 2019 – new investments in machinery 2018 – ZPAS celebrates its 45th birthday with all the employees 2016 – opening of an electrical assembly plant with an area of 9 000 m2 in Nowa Ruda – Drogosław at Piłsudskiego Street 2007 – opening of a production plant with an area of 3 500 m2 in Nowa Ruda – Drogosław at Górnicza Street 2007 – opening of a 10 000 m2 serial production plant in Nowa Ruda – Słupiec 2003 – the Przygórze plant expanded with new production halls and automatic powder coating plant 1991 – transformation of the experimental plant into the Network...

ZPAS PRODUCTION PLANTS Przygórze ZPAS S.A. Management Board Office, administration and design production plant Nowa Ruda – Drogosław, Piłsudskiego Street Manufacturing plant – electrical assembly Nowa Ruda – Drogosław, Górnicza Street Outdoor Enclosures Production Plant Nowa Ruda – Słupiec, Spacerowa Street Serial production plant and warehouse for finished product

For standard indoor products, the manufacturer provides a 5-year guarantee for mechanical components. Electrical and electronic components, as well as woodwork finishes (desktops and covers) are covered by a 2-year guarantee, provided that they are used as intended and serviced in accordance with the manufacturer's instructions. For outdoor and custom-made products, the guarantee is determined individually. QUALITY AND ENVIRONMENTAL MANAGEMENT SYSTEM

INDUSTRIAL ENCLOSURES

INDUSTRIAL ENCLOSURES INDUSTRIAL ENCLOSURES SZE2 system cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Sample customised cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

INDUSTRIAL ENCLOSURES INDUSTRIAL ENCLOSURES

INDUSTRIAL ENCLOSURES

INDUSTRIAL ENCLOSURES • Universal industrial cabinets designed for both outdoor and indoor applications. • Design of the cabinet allows easy baying in rows. • Manufactured in 26 standard dimensions according to the chart below. • Cabinets of non-standard dimensions (e.g. with a height of 1800 mm) or in stainless steel version can be manufactured on individual customer's request. REFERENCE CHART cabinet's frame, front door with a lock that incl. double-bit insert (no handle), rear panel, mounting plate for the full height of the cabinet, blanking plates for cabinet's top plate, set of sliding...

INDUSTRIAL ENCLOSURES CABINET DESIGN Welded framework of the cabinet - Slotted side framework enables fixing a system of mounting rails or a mounting plate. - The top plate of the frame is fitted with openings designed for cable entries or for mounting fan units. In the standard version, they are blinded with solid blanking plates. - The bottom plate of the frame is fitted with one or two openings designed for cable entries. In the standard version, they are blinded with sliding gland plates. Front door, rear panel - Cabinets 1000 and 1200 mm wide are equipped with a double-leaf door, while cabinets...

INDUSTRIAL ENCLOSURES Notes: Dimensions of bottom and top plates are specified on pages 18-19. Detailed drawings of the cabinet are given on pages 16-17.

INDUSTRIAL ENCLOSURES Front view (cabinet with single-leaf door) DESIGN 1. Cabinet's frame 2. Door 3. Rear panel 4. Flushed side panel 5. External side panel 6. Plinth 7. Mounting plate 8. Roof 9. Lifting eye 10. Lock with double-bit insert (factory installed) 11. Lock with swing handle and cylinder insert (optional) 12. Blanking plate

INDUSTRIAL ENCLOSURES SYSTEM CABINETS Side view Side view (comparison of flushed and external side panels) (comparison of flushed and external side panels) Dimensions of bottom and top plates are specified on pages 18-19. Detailed drawings of the cabinet are given on pages 16-17. SZE2 cabinet 1200 mm wide, without side panels, intended for baying in rows REFERENCE CHART – cabinets with a width of 1000–1200 mm Dimensions of cabinet’s frame [mm] Door’s type Dimensions of mounting plate [mm] Height H Width W Depth D Number of wings Height HP Width WP Page Package Supplementary accessories** SZE2...

INDUSTRIAL ENCLOSURES Front view (cabinet with double-leaf door) DESIGN 1. Cabinet's frame 2. Door 3. Rear panel 4. Flushed side panel 5. External side panel 6. Plinth 7. Mounting plate

INDUSTRIAL ENCLOSURES Front view Front view

INDUSTRIAL ENCLOSURES (openings for floor fastening) Mounting plate Welded plinth (openings for floor fastening) Note: After mounting of external side panels the cabinet expands by 25 mm on each side. An additional distance of 3 mm (gasket gauge) should be considered between bayed cabinets. WIDTH DIMENSIONS

INDUSTRIAL ENCLOSURES 5ZE5 SYSTEM CABINETSBOTTOM PLATE TYPES Note: Standard openings in bottom plates are blinded with sliding gland plates. Optional types of gland plates - see page 46-47 Note: On request there is a possibility to make a different type of gland plates and changes in design of the bottom plate.

INDUSTRIAL ENCLOSURES SYSTEM CABINETS SZES TOP PLATE TYPES Tft Note: Standard openings in top plates are blinded with solid blanking plates with sealing gaskets. Optional types of blanking and cable entry plates - see page 45 DESIGN

INDUSTRIAL ENCLOSURES 011 Reference number specifies the cabinet's overall dimensions (see reference chart) Door or panel: S1 U1 - Solid steel door S2 U2 - Steel door with glass S3 U3 - Steel door with passive ventilation S4 U4 - Steel door with glass and passive ventilation* S5 U5 - Steel door with active ventilation* Lock with swing handle '-lock with double-bit insert (without handle) 0A - Solid steel rear panel 00 - Without door or panel The above markings show the right-hand door design (with hinges on the right). Changing to the left-hand door involves reversing the encoding pattern, e.g....