tube bender R1

1 / 2 PagesView full catalog

tube bender R1

Product catalog summary

Technical Specifications and Features:

Bending radius ranges from 55 mm to 340 mm.
Tubes with diameters from 5 mm to 50 mm (60 mm for R2) can be bent.
Maximum rotating angle is 210 degrees.
Bending and springback angles are programmable via a microprocessor.
Supports 100 programs, each with 9 bends.
Precise electronic control of the C-shaft.
Rapid tooling engagement and disengagement.
Movable with a pallet truck.
Dimensions: 930x410x1000 mm; Weight: 230 kg.
Motor specifications: 1.5 KW, 2 – 4.3 RPM; R1 Inverter 230V single phase; R2 Inverter 400V / 50 Hz / 3 phase.

Bending Capacities:

Steel, brass, and furniture tubes: 50x3.2 mm for R1, 60x3.2 mm for R2.
Stainless steel tubes: 50x2.5 mm for R1, 60x2.5 mm for R2.
Hydraulic tubes ST 35: 50x4 mm for R1, 60x4 mm for R2.
Hard copper and aluminum tubes: 50x4 mm for R1, 60x4 mm for R2.
Solid round: 30 mm for R1, 35 mm for R2.
Square tubes: 40x40x3 mm for R1, 40x40x4 mm for R2.
T-section: 40x40x5 mm for R1, 40x40x6 mm for R2.

Additional Features:

Programmable control unit with automatic and manual bending modes.
Choice of languages for operation.
External foot pedal and emergency stop feature.
Optional shaft support and special tooling available on request.
Counterrollers are tempered, with polyamide as an option.

Manufacturer Information:

Zopf Biegemaschinen GmbH, Hauptstr. 2, D-89356 Haldenwang. Contact: Tel. ++49/(0)8222/1085 – 1087, Fax ++49/(0)8222/6204, Email: [email protected], Website: www.zopfbiegemaschinen.de

Note: All specifications are subject to change without notice.

Catalog excerpts

Technische Daten / Features: - Biegeradius von R55 bis R340 mm bending radius R55 – R340 mm Biegeleistung von Rohr 5 mm bis 50 mm (60 mm – R 2) bending capacity of tube 5 mm – 50 mm (60 mm – R 2) Drehwinkel maximal 210 Grad maximum rotating angle 210° Biegewinkel und Rückfederung sind programmierbar bending angle and springback angle are programmable by means of a microprocessor Anzeige und Steuerung der C-Achse Schneller Werkzeugwechsel 100 programs of 9 bends each precise electronic control of C-shaft rapid engagement and disengagement of the tooling movable Masse 930x410x1000 mm dimensions 930x410x1000 mm Gewicht 230 kg Motor 1,5 KW 2 – 4,3 U/min; R1 Inverter 230V single phase; R2 Inverter 400V / 50 Hz / 3 ph. Biegeleistungen / Bending capacity: Gasrohr / steel tube Messingrohr / brass tube Möbelbaurohr / furniture tube Edelstahlrohr / stainless steel tube Hydraulikrohr ST 35 / hydraulic tube ST 35 Hartkupfer und Alurohr / hard copper and aluminium tube Rund voll / solid round Vierkantrohr / square tube T-Eisen / T-section Zopf Biegemaschinen GmbH Hauptstr. 2, D-89356 Haldenwang Tel. ++49/(0)8222/1085 – 1087, Fax ++49/(0)8222/6204 E-mail: [email protected]; Internet: www.zopfbiegemaschinen.de Die technischen Daten werden nur zur Information gegeben und können jederzeit ohne Vorankündigung vom Hersteller geändert werden All specifications are subject to change without notice.

Open the catalog to page 1

-Steuereinheit programmierbar -100 Programme von je 9 Biegungen -Automatischer Biegemodus -Manueller Biegemodus -verschiedene Sprachen -Control Unit -100 programs of 9 bends each -automatic bending mode -manual bending mode -choice of languages -schneller Werkzeugwechsel -im Steckverfahren -Skala für Gegenhalter im Tisch -rapid change of tooling -no operating tools necessary -skale for counterbending holder -Externes Fußpedal -Not Aus auf Steuerung -Pedal für Biegen und Zurück -External footpedal -Emergency Stop -Pedal for bending and return -Wellenstütze optional -Shaft support optional -Gegenrollen...

Open the catalog to page 2

All Zopf catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list