Bendingmachines model ZB 30

Product catalog summary

Machine Description
The document describes a bending machine with both manual and hydraulic options for adjusting the center roller. It features three driven shafts and can operate in both horizontal and vertical positions. The machine uses conical bearings for shaft support and has exchangeable slide bars on the slide-support.

NC Control Features
The NC control system for the ZB 30/3 H model includes a two-axis control with a touch screen interface. It can store up to 1000 programs, each with 19 steps, and allows for interpolation. The system offers a y-axis accuracy of 1/10 mm and supports programmable forward and backward movements.

Technical Specifications
The machine specifications include a shaft diameter of 20 mm, roller diameter ranging from 76 to 86 mm, and a shaft rotation speed of approximately 11 rpm. It operates on a 400/50 3-phase voltage with a driving motor and hydraulic motor each rated at 0.18 kW. The hydraulic pressure is 15 KN, and the machine's weight and dimensions vary between models.

Bending Capacity
The bending capacity section notes that the specifications are subject to change without notice. The machine can accommodate wide rollers made of steel or polyamide.

Contact Information
The manufacturer, Zopf Biegemaschinen GmbH, is located in Haldenwang, Germany, with contact details provided for further inquiries.

Catalog excerpts

ZB 30/3 MD BIEGEN 1ST UNSERE STARKE BENDING IS OUR FORCE Special ZB 33 H Touch Screen Contro1 ZB 30/3 H NC Steuerung NC Control MASCHINENBESCHREIBUNG - Manuelle Zustellung der oberen Walze (M-Ausfuhrung) - Drei angetriebene Walzen - Hydraulische Zustellung der oberen Walze (H-Modelle) - Digitalanzeige mit Memoryfunktion (H-Modelle) - Arbeitsposition horizontal und vertikal - Lagerung der Wellen mit Kegelrollenlager - Verwendung von auswechselbaren Gleitschienen am Fuhrungsschlitten TECHNICAL SPECIFICATIONS - manual adjusting of the center roller (M-version) - three driven shafts (ZB 30/3 H) - hydraulic adjustment of center roller (H-version) - digital readout with memory (H-version) - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable NC - Control for the ZB 30/3 H - two axes controlled - touch screen - memorise of 1000 programs each 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward NC - Steuerung fur ZB 30/3 H - Zwei-Achsensteuerung - Direkte Eingabe am TOUCH SCREEN - Abspeichern von 1000 Programmen a 19 Schritten - Interpolation moglich - Anfahrgenauigkeit der y-Achse 1/10 mm - Endradius durch mehrfach programmierbare Zustellung moglich TECHNISCHE DATEN / TECHNICAL DATA Wellendurchmesser Walzendurchmesser Wellenumdrehungen AnschluRwert Antriebsmotor Motor - Hydraulikpumpe Druckkraft Hydraulk (H) Gewicht Abmessungen l x b x h shaft diameter roller diameter shaft rpm voltage driving motor motor for hydraulic (H) hydraulic pressure (H) weight dimensions l x b x h Zopf Biegemaschinen GmbH Hauptstr. 2, 89356 Haldenwang Tel.: +49(0)8222 1085, Fax: +49(0)8222 6204 [email protected]; www.zopfbiegemaschinen.de

Open the catalog to page 1

Bendingmachines model ZB 30

Bendingmachines model ZB 30

Catalog excerpts

All Zopf catalogs and technical brochures