Packing List and Component Specifications

This section provides a detailed packing list of the tower crane components, including jib sections (Jib I to Jib VIII), tower head, hook, cabin, slewing mast, trolley, slewing assembly, climbing frame, and counter-jib sections. Each item is listed with its shape, dimensions (length, width, height in meters), weight per piece (in tons), and quantity. The jib sections vary in length from approximately 5.19m to 10.19m, with weights ranging from 0.14t to 3.32t. The list ensures all parts are accounted for during transport and assembly.

Crane Model and Manufacturer Information

The document references the ZOOMLION TC6013A-6F hammerhead tower crane model. Contact details for domestic and overseas service, including hotline numbers, email, and websites, are provided. The manufacturer reserves the right to change product design and specifications without prior notice.

Load and Reaction Forces

Details on reaction forces during working and non-working states are included, specifying that values exclude ballast and load weights. The maximum jib length and free-standing height are considered for self-weight calculations. Ballast weights for independent height and maximum jib length configurations are also provided.

Mechanisms and Performance Parameters

The crane's main mechanisms include slewing, trolleying, and hoisting. Performance parameters such as motor power (39kW), voltage (380V ±10%), frequency (50Hz), and operational speeds (m/min, r/min) are specified. Wire rope specifications (440m length, 6 layers) and drum dimensions are also noted.

Load Diagrams and Capacity

Load capacity varies with jib length and radius, with maximum capacities of 6t at shorter radii (2.5~17.5m) and 3t at longer radii (up to ~38m). The document includes load diagrams for jib lengths from 30m to 60m, showing lifting capacities at various radii. The crane's maximum lifting radius extends to 60m with corresponding load limits.

Configurations and Sections

The crane configuration includes specific components such as the QE680D engine, HPW55B.130, and BP40B parts. Standard sheet sections and base sections (L46G20) are listed, indicating modular assembly parts. The document also details the number of pieces per section and their dimensions.

Outrigger and Bolted Fixing Details

Outrigger and bolt fixing methods are described with corresponding reaction forces (F2, F3) and load capacities ranging from 44t to 158t. Heights for outriggers and bolts are specified, with diagrams indicating positions and load distribution. This ensures stability and safety during crane operation.

Anchorages and Height Specifications

Anchor points are detailed with heights ranging from 45m to 216m, specifying distances and structural support requirements. The document includes measurements for anchorage spacing and positioning to maintain crane stability at various heights.

Recommendations and Contact Information

Users are advised to contact the manufacturer if operational requirements exceed the specified parameters. This ensures safe and optimal crane performance tailored to specific project needs.