Technical Datasheet Panex® 30 Roving High-Twist Carbon Roving Description Panex® 30 High-Twist Roving is manufactured with high twist to improve its handling characteristics. The roving is widely used as a baseline material for the manufacture of friction clutches and brakes. Thick fabrics woven of Panex® 30 High-Twist Roving allow for efficient buildup during fabrication of composite substructures. Material Overivew SI US Carbon Content 99% Tensile Strength 1,552 MPa 225 ksi Tensile Modulus 221 GPa 32 msi Density 1.75 g/cc 0.063 lb/in3 2,015 m/kg 1,000 yds/lb Yield Denier 9,000m / 4,820g Twist Direction S or Z Turns per Inch 1.7 Oxidation Rate (% per hour) at 932°F (500°C) 1.0 *fiber properties generated using ASTM standard methods Typical Packaging Certification Roving shall weigh a minimum of 1.0 pound and shall be placed into a plastic bag, twist tied closed, and placed into a partitioned 22” x 22” x 8” double wall cardboard box with support pads above and below the layer to prevent damage. Each box holds up to 16 spools. Panex® 30 High Twist Roving is manufactured in accordance with Zoltek’s written and published data. A Certificate of Conformance is provided with each shipment. Safety Obtain, read, and understand the Material Safety Data Sheet (MSDS) before use of this or any other Zoltek product. ISO 9001 AS9100 BUREAU VERITAS Certification No US09000636 PANEX® is a registered trademark of Zoltek Corporation Zoltek Corporation | 3101 McKelvey Rd. | St. Louis, MO 63044 P: 314-291-5110 | F: 314-291-8536 | E: [email protected] | W: www.zoltek.com 0611