AQASONIC
2Pages

DEVICE WATER PROCESSING EQUIPMENT Type “AQUASONIC” PRINCIPLE OF OPERATION Through its patented unique shape and segments arrangement plus permanent magnets, this device uses energy from running water as repeatedly collides in each other generated streams on the analogy of multitude micro waterfalls. These waterfalls generate supersound, which transforms calcite. GENERAL TECHNICAL CHARACTERISTICS Working pressure – Min./Max (Bar) 0,3/16 Cv value at ∆Р = 4 Bar 70 l/min. Medium temperature range (0С) from 0 to +80 Direction Required - marked with an arrow Throughput copacity - minimum (l/minute) 3 Connection type – G 3/4 Orientation in space Arbitrarily Body material Stainless steel; Polyamide РА 6 WORK CONDITIONS Working fluid – water. SPECIFICATION Working pressure (Bar) Connecti Passage Throughput capacity on type section at 4 Bar (G) (mm) (m3/h) (l/min) 3/4 15 4,2 70 Catalogue number Gaskets „Aquasonic“ NO MARKING AND LABELING Each product name is in accordance with the legislation of the EU and the Republic of Bulgaria. They comply with the following standards: 2006/95 / EU - European Union Directive 2006/95 / EC of 12 December 2006 on the harmonization of the laws of the member-states relating to electrical equipment intended for use within certain voltage limits. "Conformity mark" the CE marking is a mark of conformity affixed to certain products intended for the European market and which declares that the products meet the European safety requirements. METHOD OF CONTROL The control method is performed as described in the manufacturer'

PROPER STORAGE The devices should be stored in dry ventilated rooms with a temperature of minus 25 0C to plus 550C and relative humidity up to 80%. There must be no substances in the premises that could cause corrosion of the parts. TRANSPORTATION The devices can be transported in packaging at a temperature of -200C to + 500C. After unpacking, they must stand for at least two hours at a temperature of + 5 0C to + 400C before being handled. ZITA BG EOOD reserves the right to change the complete set, constructions and specifications of the products without prior notice.