ZITA BG ELECTROMAGNETIC (SOLENOID) VALVE Type 0955400.0900 Normally closed; indirect effect; G ¾; 2/2 way PRINCIPLE OF OPERATION The electromagnetic valves of this type are devices providing by means of electromagnetic drive control of flowing and stopping of fluid on the pipelines. In the automatic regulation systems they serve as relay bodies for remote control and regulation. The electromagnetic valves are intended for integration in automatic systems in machine building, energy, chemical industry etc. The electromagnetic valves of these series are two-way, two-positioned, normally closed, with indirect effect. The valves have a certain direction of fluid flow, which is indicated on the article. Many of the electromagnetic valves are operating on digital principle. Because of this they have two states – when to the electromagnet (coil) is supplied electrical signal and when the valves are in idle state (no voltage is supplied). The valves function is determined of their state in which they are at the moment. GENERAL TECHNICAL FEATURES Working pressure (∆Р) from 1 to 16 Bars Maximum permissible pressure (∆Р) 16 Bars Ambient temperature (0С) From minus 30 to +60 Viscosity of the working fluid maximum 25 sSt (mm2/с) Time for valve bedding-in Up to 2.5 seconds (at air DP = 16 Bars) Working fluid water; air; gas; petrol products Temperature range of the working fluid(0С) From minus 30 to +80 Gaskets NBR (Nitrile Butadiene Rubber) CONSTRUCTION 1. Body 2. Tongue 3. Internal parts 4. Spring 5. Seat 6. Gasket brass stainless steel brass stainless steel stainless steel NBR (other gasket on request) ELECTRICAL FEATURES Electromagnet conductor copper Coil insulation class F Protection degree IP 65 Coupling specification ISO 4400 Connection flat Standard voltages 12V, 24V, 48V, 110V, 220V DC/АС Specification for connection at degree of protection IP 65 Connector type DIN 43650-A

ZITA BG Connector plug Installation On cable Nominal pressure 250 V Structure of batten terminals 2+РЕ Maximum current 16 А Conformity with standard DIN 43650-A, ISO 4400 External conductor diameter from 6 to 9 mm Conductor section 1,5 mm2 SPECIFICATION Throughput capacity Connection dimensions Passage section Working pressure ∆Р (Bar) Coil type MINIMUM Catalogue number The electromagnetic valves of this type may be installed arbitrarily. These valves do not have installation openings provided in the body. The pipe connection (G) standard threading in conformity with ISO 228/1 and ISO 7/1. Other...

ZITA BG The electromagnetic valves of these series are with protection degree IP 65 and their use at other conditions is not permitted. The duration of switching-in is 100%. REGULAR STORAGE The valves shall be stored in dry ventilated premises with temperature from minus 250С to plus 550С and relative humidity up to 80%. In the premises shall not be substances which would cause corrosion of parts. TRANSPORTATION The valves may be transported in package at temperature from -200С to +500С. After unpacking they should stay at least two hours at temperature from +50С to +400С before their operation....