Soluble-Fiber Board Type Z-MAG Q General Information ZIRCAR Ceramics’ Soluble-Fiber Board Type Z-MAG Q is the name of a group of rigid, low-density products that combine low-shot biosoluble Alkaline Earth Silicate (AES) fiber with an inorganic refractory binder. Z-MAG Q is made in a process that results in a uniform distribution of binder, giving these products good machinability and strength. The Non-RCF fibers built into this product are not regulated under EU Directive 97/69/EC. Z-MAG Q is manufactured in three densities in a range of flat boards and custom configurations. All grades offer low thermal conductivity and exhibit excellent resistance to thermal shock. They are prefired, contain no organics and do not outgas when fired. Z-MAG Q exhibits very good resistance to chemical attack with the exceptions of hydrofluoric acid, phosphoric acid and strong alkalis. Product Type ZIRCAR Ceramics, Inc. PO Box 519 100 N. Main St., Florida, NY 10921-0519 Telephone: (845) 651-6600 E-mail: [email protected] Technical Data Bulletin Soluble-Fiber Board Type Z-MAG Q www.zircarceramics.com Page 1 of 2

Soluble-Fiber Board Type Z-MAG QCharacteristics & Properties Continued Thermal Conductivity**, W/m°K (BTU/hr ft2 °F/in) The data presented herein is intended to help the user to determine the appropriateness of this material for their application. This data is a nominal representation of this product's properties and characteristics and therefore should not be used in preparing specifications. Properties are typical of recent production and are subject to change. * Maximum use temperature is dependent on variables such as stresses, both thermal and mechanical, and the chemical environment that...