Heating Element Holder Type K-1 General Information ZIRCAR Ceramics’ Type K-1 Heating Element Holders are made of high-density-alumina ceramics and corrosion-resistant hardware. They are used to secure and support the terminals of MoSi2 Heating Elements in applications where the elements are installed from the inside of a furnace chamber. K-1 Element Holders are designed for use on elements with 6mm-diameter terminals with center-to-center spacing of 25mm (1.0”). Type K-1 Heating Element Holder installed onto 6mm diameter MoSi2Heating Element terminals. Element Holder Type The data presented herein is intended to help the user to determine the appropriateness of this product for their application. This data is a nominal representation of this product's properties and characteristics and therefore should not be used in preparing specifications. Suggested Applications Holder for MoSi2 Heating Elements with 6mm diameter terminals. Availability of Standard K-1 Holders To Order Standard items: order online or specify quantity, item # and descriptions. Standard items are available for immediate shipment from stock. ZIRCAR Ceramics, Inc. PO Box 519 Technical Data Bulletin 100 N. Main St., Florida, NY 10921-0519 Heating Element Holders Type K E-mail: [email protected] Page 1 of 1