Catalog excerpts
Alumina-Silica Type ASQ-20 General Information ZIRCAR Ceramics’ Alumina-Silica Type ASQ-20 is a premium-grade, medium-density combination of shot -free refractory ceramic fibers (RCF) and high-purity inorganic alumina binder. Initially designed for use as baffles and spacers in injection nozzles on SCAL thin-strip casters, ASQ-20 exhibits low density and low thermal conductivity. ASQ-20 exhibits good hot strength and resiliency making it virtually immune to thermal shock and changes in molten aluminum head pressure. As its alumina binder is uniformly distributed ASQ-20 is machinable to very well controlled dimensional tolerances. When used in contact with molten aluminum it does not require a coating of Boron Nitride. Its fine colloidal alumina particles also make it suitable for use as a glass slumping and fusing mold. ASQ-20 is pre-fired contains no organic binders and will produce no smoke or odors when heated. ASQ-20 shows excellent resistance to chemical attack and is not affected by oil or water. It is, however, affected by hydrofluoric acid, phosphoric acid and strong alkalis. ZIRCAR Ceramics, Inc. PO Box 519 Technical Data Bulletin 100 N. Main St., Florida, NY 10921-0519 Alumina-Silica Type ASQ-20 E-mail: sales@zircarceramics.com Page 1 of 2
Open the catalog to page 1Alumina-Silica Type ASQ-20Characteristics & Properties Continued Thermal Conductivity,** W/mK (BTU/hr ft2 °F/in) The data presented herein is intended to help the user to determine the appropriateness of this material for their application. This data is a nominal representation of this product's properties and characteristics and therefore should not be used in preparing specifications. * Maximum use temperature is dependent on variables such as stresses, both thermal and mechanical, and the chemical environment that the material experiences. f Properties expressed perpendicular to...
Open the catalog to page 2All ZIRCAR Ceramics catalogs and technical brochures
-
Type AX-200
2 Pages
-
Type FIM
4 Pages
-
Type HTMOD
3 Pages
-
Type IB-100
2 Pages
-
Bubble Alumina
2 Pages
-
Type ZIRALCAST-94
2 Pages
-
Alumina Furnace Pins
2 Pages
-
Type DAHP
2 Pages
-
Type HR
2 Pages
-
Type HC
2 Pages
-
Type H
2 Pages
-
Type K-1
1 Pages
-
Heating Element Straps
2 Pages
-
Type RAHP
2 Pages
-
Type SC-1
2 Pages
-
Type MTC
1 Pages
-
Type ZAL-45
2 Pages
-
Type AL-30AA
2 Pages
-
Type BM
2 Pages
-
Type Z-MAG Q
2 Pages
-
AXL
3 Pages
-
AXHTM
3 Pages
-
ASH
2 Pages
-
UNIFORM C
2 Pages
-
UNIFORM A
2 Pages
-
ECO-1200
2 Pages
-
ZAL-45AA
2 Pages
-
ZAL-45
2 Pages
-
ZAL-15AA
2 Pages
-
ZAL-15
2 Pages
-
SALI-2
2 Pages
-
SALI
2 Pages
-
PATI
3 Pages
-
ECO-20AA
2 Pages
-
CRYSTAL-18
2 Pages
-
ALC-AA
2 Pages
-
AL-45/1700
2 Pages
-
AL-30AAH
2 Pages
-
Alumina Type AL-30
2 Pages
-
Alumina ALC
2 Pages
-
AL-30AA
2 Pages
-
Type AL-28/1800
2 Pages
-
AL-25/1700
2 Pages
-
SC-1
2 Pages