Universal Pipe Cutting Machine with 2 axes for oxy-fuel or plasma cutting plus drilling of cylindrical pipes Universal Pipe Cutting Machines for oxy-fuel or plasma cutting plus drilling for cylindrical and multi-sided pipes Pipe diameter (standard) Cutting length (Working length) Basic length: 1.000 mm Extensions in steps of 1.000 mm Working width at Y-cantilever 1 torch with height adjustment; Oxy-fuel / Plasma / Drilling Pipe support system consisting of a guide track and height adjustable dollies Further information and detailed consultancy on the best cutting system for you can be obtained from your ZINSER team. ZINSER GmbH Daimlerstr. 4 D-73095 Albershausen Phone +49 7161 5050-0 Fax +49 7161 5050-100 [email protected] l www.zinser.de Subject to changes and possible errors 11.12 504 1101-00211 ZINSER 1304/06 Technical Data:

Universal Pipe Cutting Machines for oxy-fuel or plasma cutting plus drilling for cylindrical and multi-sided pipes The ZINSER cutting machines 1304 and 1306 have been particularly developed for efficient machining of pipes (ZINSER 1304 for cylindrical pipes, ZINSER 1306 for cylindrical and multi-sided pipes). Apertures, notches and the entire end preparation can be realized quickly and economically. A variety of standard figures L912 fitting on pipe bevelled. centric As option there is a range of different drilling units available. is available from the ZINSER MCC software. With the new generation...