• Machine Width: Approximately 2850 mm
• Machine Length: Approximately 2000 mm
• Cutting Width: 1000 mm
• Weight: Approximately 190 kg
• Supply Voltage: 230 volts
• Input Power: Approximately 250 watts

The ZINSER 1101 is a flame cutting machine designed for oxygen cutting with optical follower control. It is equipped with a rack and pinion drive that ensures reliable tracing at high speeds. The optical follower control LK 110 is easy to service and allows for adjustments using an externally mounted potentiometer.

• Manual control with coordinate switch for all four directions
• Line and edge tracing capabilities
• Adjustable tracing speed from 50 to 1000 mm/min, with change-over to 200 to 4000 mm/min
• Automatic start and stop of cutting process
• Kerf compensation of ± 3 mm if the line is lost

• Opto-electronic follower control
• Three-hose machine torch for 3 - 100 mm cutting
• Connection available for up to 2 torches

• Motorized and capacitive torch height adjustment
• Central gas supply
• Electric torch ignition device
• Piercing device

For further information and detailed consultancy on the best cutting system, contact the ZINSER team at their Albershausen, Germany location.