For the translating version S
5Pages

Accessories for screw jacks For the translating version S Trapezoidal screw Z-..-S-Tr Material: St 60, C35, C45 (stainless steel, double-pitch, left-handed, on request, quality 7e DIN 103, pitch accuracy 0.2 mm/300 mm Rolled as standard, from Tr 80 whirled Material: steel, corrosion-resistant; aluminium, hard anodised (GSZ-2-BF) identical to the previous MSZ type Material: steel, galvanised (stainless steel on request) incl. bolt and cotter pin identical to the previous MSZ type CAUTION: Use only with rotation protection Material: steel/steel. galvanised; steel/PTFE for GSZ-2-KGK (stainless steel on request) *identical to the previous MSZ type

Accessories for screw jacks For the translating version S Pivot bearing end SLK b-h10 Protective tube SRO with cover Material: Steel, powder-coatedt ; Aluminium, black anodised (GSZ-2-SRO) Cover: Aluminium, corrosion-resistant; PE, black (GSZ-2) Material: *Steel, bronze Rotation protection is required if the screw is not fixed to the load so that it cannot rotate, or is installed in combination with limit switches or the rod end KGK. Material: Steel Escape protection prevents the screw being wound out of the gearbox. It is particularly recommended for ball screws. Do not rely on it as an...

Accessories for screw jacks Limit switch set Product features Integrated plug, for fast and comfortable revisions Robust fitting, protects against damage Fine adjustment +/- 5mm possible Enclosed fitting, resistant to dirt penetration Cable outlet turnable 180° Assembled and preset delivery Technical data Type: Material: Mode of operation: Protection class: Temperature range: Cable standard – material: Cable standard – temperature: Cable special – temperature: Electrical duty: Electrical service life: Weight: NC NO Protective earth conductor mechanical limit switch with positively-actuated...

Accessories for screw jacks Limit switch set Dimensions Size GSZ-2 Z-5 Limit switch position Ordering code Ordering code for limit switch set: Z-25-ES-5-G-A Gearbox size Cable length 2m, 5m (standard) or 10m Installation G = gearbox face (standard) E = end of the protective tube (standard) S = special position, S = ?? mm V = set pre-assembled Limit switch position A (standard), B, C or D Datasheet with all technical details on request. Ordering code for an single switch: Z-25-ES-5 Cable length 2m, 5m or 10m, 0 = without cable

Accessories for screw jacks Pivoting support tube STRO STRO-P Parallel to the drive shaft R STRO-R Right angle to the drive shaft max. stroke for this type: 500 mm! When using the pivoting support tube, take into consideration the torques arising due to the weight of the motor etc. - support is necessary! GS = S+stroke Lmin + stroke (without bellows) Fixing: see pages 154, 159 Pivoting support tube STRO with integral pivot end Ordering example: Standard with AS/VS with ES Standard with AS/VS with ES Standard with AS/VS with ES Standard with AS/VS with ES Standard with AS/VS with ES Standard...