GSZ series screw jacks, SN+SL
2Pages

GSZ series screw jacks, SN+SL UNIQUE: Screw lubrication during operation Opening for protective tube SRO, rectangular 43x27 or round Ø 44 Screw length Type: GSZ-2-SN static: 2,5 kN ratio: i=4:1 n, mom: 1500 rpm n, max: 3000 rpm serial-no: L-Z01-0013567 Overall height Minimum space requirement for greasing the screw (grease gun) Fitting height “Y” for 0-stroke, with Tr 16x4 screw Protective tube length SRO with Tr 16x4 screw *Hinged bearing plate KAR, fitted on face F (below). Standard ratios Translating screw Rotating screw Normal Low speed Normal Low speed 2.5 kN compressive and tensile load M6, strength class 8.8 8 to 10 mm 8 Nm with Loctite 243 Duty cycle thermal limit, for S+R Screw jack mounting max. load: Screw: Screw-in depth: Tightening torque: Screw locking: Bellows FB Y without bellows FB 80 GSZ-2-FB-182 117 GSZ-2-FB-364 177 *with bellows fixing ring Z-2-FBR Stroke per drive shaft rotation5) 1.00 mm 0.25 mm 1.00 mm 0.25 mm These curves are for guidance under standard industrial conditions (ambient temperature etc.) and correct maintenance (lubrication etc.). The max. input drive torques for optimum service life are at the right page - technical data (1500 rpm) Without escape/ Rotation protection, Rotation protection Escape/ rotation protection rotation protection with limit switch set with ES and KAR* ES 47+stroke 117+stroke 139+stroke 62+stroke KGT: % duty cycle 2 times to 4 times hi

GSZ series screw jacks, RN+RL Fitting height Y+stroke Effective length= stroke+nut Type: GSZ-2-RN static: 2,5 kN ratio: i=4:1 n, mom: 1500 rpm n, max: 3000 rpm serial-no: L-Z01-0013568 Fitting height “Y” for 0-stroke, with Tr 16x4 screw Duplex nut DM with SIFA Bellows FB Y/A Y/A Y/A without bellows FB 132/83 142/96 167/121 2x GSZ-2-FB-182 – 198/124 220/146 2x GSZ-2-FB-364 – 318/184 340/206 Detailed instructions for determining the length can be found in Section 8 kN Technical data series GSZ-2-S / GSZ-2-R max. compressive/tensile force, static max. compressive/tensile force, dynamic Nominal...