(£)ZIKODRIVE RoHS COMPLIANT ZDSTS—1A programmable stepper motor controller with 1/256 microstep resolution BS3I52 IB Voltage Range Solder Jumpers J1 = Speed Range (default 800RPM) J2 - Current Setting 1 (Default NS) J3 = Current Setting 2 (Default NS) J4 - MicroStep Setting (256u/step) J5 = Pulse/Analogue selection (Anl) J6 = Spare (default NA) Defaults are unsoldered (open) NS = Not Set Note = All jumper settings can be changeable via programming settings and are not set by hardware. 10 Connector (Labelled on reverse side of board) • GND = Ground • STP = Step Input • ANL = Analogue Input (PWM & 0-5V) • DR = Direction • EN - Enable • 5V = 5V supply (provided by controller) Zikodrive, Unit 4B The Craggs Country Business Park, Cragg Vale, Hebden Bridge, UK, HX7 5RW www.zikodrive.com phone +44 (0) 333 123 7130 or email [email protected]

(£)ZIKODRIVE ZDSTS - ein programmierbarer Schrittmotor-Controller mit einer Auflosung von 1/256 V RoHS COMPLIANT Zikodrive, Unit 4B The Craggs Country Business Park, Cragg Vale, Hebden Bridge, UK, HX7 5RW www.zikodrive.com phone +44 (0) 333 123 7130 or email [email protected]

Cf?)ZIKODRIVE ZDSTS — Controleur de moteur pas a pas programmable 1A avec une resolution de KEY SPECIFICATIONS DIMENSIONS CABLAGE Zikodrive, Unit 4B The Craggs Country Business Park, Cragg Vale, Hebden Bridge, UK, HX7 5RW www.zikodrive.com phone +44 (0) 333 123 7130 or email [email protected]

(£)ZIKODRIVE ZDSTS: controlador de motor paso a paso programable de 1 A con resolucion de 1/256 microstepios Solder Jumpers J1=Speed Range (default 800RPM) J2 - Current Setting 1 (Default NS) J3 - Current Setting 2 (Default NS) J4 = MicroStep Setting (256u/step) J5 - Pulse/Analogue selection (Anl) J6 = Spare (default NA) Defaults are unsoldered (open) NS = Not Set Note - All jumper settings can be changeable via programming settings and are not set by hardware. 10 Connector (Labelled on reverse side of board) • GND = Ground * SIP = Step Input • ANL = Analogue Input (PWM & 0-5V) • DR = Direction •...

KEY SPECIFICATIONS Campo di tensione corrente Risoluzione Microstep Ingresso a impulsi Ingresso 0-5 V cc Potenziometro di controllo della velocita a bordo Protezione da sovracorrente Protezione contro il sur-riscaldamento_ Protezione contro l'inversione di (£)ZIK0DRIVE Controller del motore passo-passo programmabile ZDSTS-1A con risoluzione 1/256 microstep 12-24VDC 0-2A regolabile Fino a 1/256 si 10bit d isponibili No Ingressi di controllo logici Max RPM Temperatura ambiente operativa 0-5Vdc In genere oltre 1000 giri / min a seconda del motore e della tensione di esercizio (contattaci per maggiori...