*mydirectindustry

Catalogs
ZIEHL-ABEGG
Axial Fans Main Catalogue FE2owlet-ECblue

Axial Fans Main Catalogue FE2owlet-ECblue

Product catalog summary

Overview

This document provides comprehensive technical specifications for the FE2owlet-ECblue series of axial fans, covering sizes from 250 mm to 1000 mm diameter. It includes model references, electrical configurations, mechanical dimensions, and recommendations for selection and installation.

Fan Models and Sizes

The series includes multiple models categorized by fan diameter, with specific model codes indicating motor type and voltage rating. Sizes range from 250 mm (e.g., FN025-6I_.0B._7) up to 1000 mm (e.g., FN100-ZI_.GL._5P1). Variants exist for single-phase and three-phase power supplies.

Electrical Specifications

Single-phase voltage: 200-277 V
Three-phase voltages: 200-240 V and 380-480 V

Model codes encode these electrical characteristics to aid identification.

Mechanical Dimensions and Mounting Details

Detailed dimensional data is provided for each fan model, including:

Mounting hole diameters (typically 5.5 mm to 14.5 mm depending on size)
Distances between mounting points (L-K)
Overall fan dimensions including blade and housing sizes

These parameters are critical for proper installation and system integration.

Performance and Ratings

While explicit performance curves are not included, the use of EC (electronically commutated) motors indicates energy-efficient operation. Power ratings are implied through model codes.

Model Coding and Identification

The naming convention systematically encodes fan size, motor type, and voltage rating, facilitating precise selection and ordering.

Summary of Critical Information

Fan diameters: 250 mm to 1000 mm
Voltage compatibility: single-phase 200-277 V; three-phase 200-240 V and 380-480 V
Multiple motor variants per size
Comprehensive mechanical dimensions for installation
Use of EC motor technology for efficiency

Recommendations and Best Practices

Select models based on required diameter and electrical supply
Verify mechanical dimensions against installation needs
Use model codes for accurate ordering and maintenance
Match voltage and phase requirements carefully to power supply

Additional Technical Data Overview

The document also contains raw numeric and alphanumeric data related to component dimensions, likely for parts such as bearings or shafts associated with the fans or related equipment. Key points include:

Component codes (e.g., FE2owlet-ECblue, FN071, FN080) identify product lines
Dimensional parameters include diameters (Ø9.5 to Ø20+) and lengths (L-27 to L-29)
Letters such as A, V, and N/A may indicate material grades or availability

Limitations and Observations

Data is presented as raw listings without explanatory notes or graphical aids
No explicit procedural or normative guidelines are included
Interpretation requires cross-referencing with detailed catalogs or drawings

Recommendations for Use of Raw Data

Cross-reference codes and dimensions with official product catalogs for accuracy
Confirm measurement units and tolerances before application
Clarify letter code meanings with supplier or technical documentation

In conclusion, this document serves as a detailed technical reference for the FE2owlet-ECblue axial fan series and associated mechanical components, supporting selection, installation, and specification in industrial ventilation and mechanical engineering contexts.

Catalog excerpts

Axial fans Main catalogue

Open the catalog to page 1

Axial fans Main catalogue Axial fans Product overview Quick selection

Open the catalog to page 2

Axial Fans Main Catalogue FE2owlet-ECblue-5

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.11 kW* Rated speed nmax: 2580 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Steel, 1 coat paint, Ultramarine blue * Rated data Measured in full bell mouth without guard grille in installation type A according to ISO 5801. J| Connection diagram...

Open the catalog to page 5

Axial Fans Main Catalogue FE2owlet-ECblue-6

Axial fans Main catalogue Performance data Type Characteristic curve Torque Operating point Motor input power Suction side sound power level Current values determined at 230V Control technology Control module

Open the catalog to page 6

Axial Fans Main Catalogue FE2owlet-ECblue-7

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P : 0.23 kW* Rated speed nmax: 3250 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Steel, 1 coat paint, Ultramarine blue Efficiency: Naaual = 42.2 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type A...

Open the catalog to page 7

Axial Fans Main Catalogue FE2owlet-ECblue-8

Open the catalog to page 8

Axial Fans Main Catalogue FE2owlet-ECblue-9

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.15 kW* Rated speed nmax: 1900 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Steel, 1 coat paint, Ultramarine blue Efficiency: Naaual = 43.7 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type...

Open the catalog to page 9

Axial Fans Main Catalogue FE2owlet-ECblue-10

Open the catalog to page 10

Axial Fans Main Catalogue FE2owlet-ECblue-11

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.12 kW* Rated speed nmax: 1290 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Steel, 1 coat paint, Ultramarine blue * Rated data Measured in full bell mouth without guard grille in installation type A according to ISO 5801. 91 Connection diagram...

Open the catalog to page 11

Axial Fans Main Catalogue FE2owlet-ECblue-12

Open the catalog to page 12

Axial Fans Main Catalogue FE2owlet-ECblue-13

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.45 kW* Rated speed nmax: 1950 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Aluminium, 1 coat paint, Ultramarine blue Efficiency: Naaual = 47.2 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type...

Open the catalog to page 13

Axial Fans Main Catalogue FE2owlet-ECblue-14

Axial fans Main catalogue Performance data Characteristic curve Speed Operating point Motor input power Suction side sound power level Current values determined at 230V Control technology Control module

Open the catalog to page 14

Axial Fans Main Catalogue FE2owlet-ECblue-15

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.45 kW* Rated speed nmax: 1800 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Aluminium, 1 coat paint, Ultramarine blue Efficiency: Naaual = 53.3 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type...

Open the catalog to page 15

Axial Fans Main Catalogue FE2owlet-ECblue-16

Open the catalog to page 16

Axial Fans Main Catalogue FE2owlet-ECblue-17

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P8y8: 0.52 kW* Rated speed nmax: 1800 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Aluminium, 1 coat paint, Ultramarine blue Efficiency: Naaual = 51.4 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type...

Open the catalog to page 17

Axial Fans Main Catalogue FE2owlet-ECblue-18

Open the catalog to page 18

Axial Fans Main Catalogue FE2owlet-ECblue-19

Axial fans Main catalogue for single phase alternating current, 200-277 V Characteristic curve Motor input power P : 0.36 kW* Rated speed nmax: 1500 min '* Min. permitted conveyor temperature tH(min): -25 °C Max. permitted conveyor temperature t : 60 °C Electrical connection: Integrated controller with attached Motor protection: Integrated active temperature management Blades: High Performance Composite Material, uncoated, Rotor: Aluminium, 1 coat paint, Ultramarine blue Efficiency: Naaual = 52.2 / Nla,ael = 40" * Rated data Measured in full bell mouth without guard grille in installation type...

Open the catalog to page 19