Gear Shaft A:BLDC Motor B:DC Brush Motor C:Stepper Motor D:Servo Motor E:three phase asynchronous mol l— F:Explosion Proofe Motor A:PEEK Gear +316L Shaft B:PEEK Gear +Cearamic Shaf Pump Body Material Flow 0-100L/min(33.3ml/rev) 1. Precise transmission without pulsation, through the gear to provide continuous accurate fluid delivery. 2. Strong vacuum suction capacity, high and stable conveying pressure, can achieve high pressure conveying of low viscosity liquid. 3. No leakage, magnetic drive and static O-ring seal can ensure that the medium in the pump is isolated from the outside world, to achieve no leakage.

MPB1000+750WServo Motor Exploded view With 750W Servo Motor u Servo motor, safe and efficient, accurate transport, long service life. Wiring instructions Please refer to the electronic driver manual for det

Installation and use instructions 1. Take out the inlet and outlet plug and install the matching thread joint. Pump inlet and outlet joints must be wrapped with raw material belt, especially at the inlet, such as leakage will have no suction. 2. pump as close to the liquid source as possible, the inlet and outlet pipe size can not be less than the pump body joint size, as far as possible to shorten the length of the pipe, if the pipe is very long, please increase the diameter of the pipe. 3. Install in accordance with the direction indicated by the arrow on the end cover, otherwise the 4. please...