Vehicle-Mounted Fuel Gas Leakage Detection Module （Model:ZP10） Zhengzhou Winsen Electronics Technology Co.

Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not...

Zhengzhou Winsen Electronics Technology Co., Ltd ZP10 Vehicle-Mounted Fuel Gas Leakage Detection Module Profile ZP10 adopts vehicle-mounted semiconductor sensor and vehicle-mounted micro-processor, which assure the testing accuracy, and meet the strict temperature requirement in the vehicle. It is specific designed for fuel gas leak alarm. The below black base uses automotive-specific socket, with dedicated waterproof harness connector. There are two kinds of controller as supporting, Z101 and Z102. Every controller can connect with to probes, connecting to the engine and cylinder position through...

Zhengzhou Winsen Electronics Technology Co., Ltd Pins Definition S is the state output for the module: In normal working state: Output is 5KHz wave, which occupies 20% ratio. In failure state: Output is 5KHz wave, which occupies 80% ratio. In alarm state: Output is 5KHz wave which occupies 50% ratio Cautions 1 .Following conditions must be prohibited 1.1 Exposed to organic silicon steam Module will lose sensitivity and never recover if it absorbs organic silicon steam. Module must avoid exposing to silicon bond, fixature, silicon latex, putty or plastic contain silicon environment. 1.2 High Corrosive...

Zhengzhou Winsen Electronics Technology Co., Ltd Suggested aging time Less than one month No less than 48 hours No less than 72 hours More than six months No less than 168 hours 2.4 Long time exposed to adverse environment No matter the modules electrified or not, if exposed to adverse environment for long time, such as high humidity, high temperature, or high pollution etc., it will influence the module’s performance badly. Zhengzhou Winsen Electronics Technology Co., Ltd Add: No.299, Jinsuo Road, National Hi-Tech Zone, Zhengzhou 450001 China Tel: +86-371-67169097/67169670 Fax: +86-371-60932988...