Vehicle-Mounted Fuel Gas Leakage Detection Module （Model:ZP06） Manual Version V1.8 Valid from 10th,Nov 2014 Zhengzhou Winsen Electronics Technology Co.,LT

Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not...

Zhengzhou Winsen Electronics Technology Co.,Ltd. ZP06 Vehicle-Mounted Fuel Gas Leakage Detection Module Profile ZP06 adopts semiconductor sensor, which is designed for vehicle-mounted fuel gas leak alarm. It has the basic functions of vehicle-mounted flue gas leak alarm: electric power lamp, fault lamp, alarm lamp, output signal of working state; It can be installed respectively in the different positions of the vehicle, reducing the development period and guaranteeing high accurate detection. Features High sensitivity, wide voltage input, strong anti-jamming capability, good stability and shock...

Zhengzhou Winsen Electronics Technology Co.,Ltd. Application instruction External interface of ZP06 VCC, GND, S(PCB Silk print). VCC, GND connects to vehicle power supply; S is output of working status. S is the state output for the module: In normal working state: S is high level In failure state: S is low level In alarm state: Output is 1Hz wave which occupies 50% ratio ZP06 electric power lamp, fault lamp, alarm lamp. Instructions of LED lamp status: Normal status : Green lamp flickers once every three seconds. Fault status: Yellow lamp keeps light. Alarm status: Red lamp flickers once every...

Zhengzhou Winsen Electronics Technology Co.,Ltd. aging time as follow: Stable3. Storage Time Suggested aging time Less than one month No less than 48 hours No less than 72 hours More than six months No less than 168 hours 2.4 Long time exposed to adverse environment No matter the modules electrified or not, if exposed to adverse environment for long time, such as high humidity, high temperature, or high pollution etc., it will influence the module’s performance badly. Zhengzhou Winsen Electronics Technology Co., Ltd Add: No.299, Jinsuo Road, National Hi-Tech Zone, Zhengzhou 450001 China Tel:...