Laster dust sensor Compact Laser Dust Sensor Module (Model: ZH10-F) Manual Version: 1.0 Valid from: 2023-03-12 Zhengzhou Winsen Electronic Technology Co., Ltd Tel: 86-371-67169097/67169670 Email: [email protected] Leading gas sensing solutions supplier in China!

Laster dust sensor Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers using it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the...

Laster dust sensor ZH10-F Compact Laser Dust Sensor Module Inlet (Dust collecting hole) Description: ZH10 Compact Laser Dust Sensor Module is a common type, miniature size sensor module, using laser scattering principle to detect the dust particles in air, with good consistency and stability. Processed by professional algorithms and calibrated detection processes, the sensor has good consistency and Detectable Particle Diameter Effective Range Detection Interval stability. The sensor has both serial output and PWM output capabilities, which is easy to use, small in size, and easy to integrate....

Laster dust sensor Pin Order: Setting Terminal (TTL @3.3V, high level or floating is normal working state, how level is sleep state) Terminal Description: Sensor terminal and matching terminal description: Figure 2-1 Mating terminals(for reference only) Note: The matching terminals in Figure 2-1 are for reference only. When using the SMD mating terminal to connect the sensor, ensure a safe distance between the sensor housing and the terminal pins to prevent short-circuit and other faults. Email: [email protected] Leading gas sensing solutions supplier in Chi

Laster dust sensor Principle Description: Sensor Construction: Note: Dimensional tolerance: ±0.5mm Email: [email protected] Leading gas sensing solutions supplier in China!

Laster dust sensor Installation Methods: The dust collection hole is the air inlet inside the sensor, which needs to keep good contact with the external air; the fan is installed at the air outlet inside the sensor. When the sensor is installed and working, must avoid strong airflow interference around the sensor; if it cannot be avoided, try to keep the external airflow direction perpendicular to the internal airflow direction of the sensor. When designing the detection cavity of the whole machine, the effective area of the sampling port of the sensor should be fully considered to ensure the...

Laster dust sensor PM2.5 Typical Output Characteristics： ZH10 conformance testing against TSI8530 Test ambient particulate matter concentration ug/ Note: The picture shows the data comparison between the conventional ZH10 laser particle sensor and TSI8530 in the test environment. Abscissa: Testing time related parameters, Unit: s; Ordinate: The concentration of particles in the test environment (with TSI8530 data as reference, unit: μg /m³). Email: [email protected] Leading gas sensing solutions supplier in China

Laster dust sensor Notes: 1. It is forbidden to remove the shield cover of the sensor and the internal fixing screw of the sensor, because the shield cover of the sensor is connected with the internal power supply of the sensor through the internal spring. If the shield cover of the sensor is removed, the anti-interference ability of the sensor will be poor, the output value of the sensor will change, and the performance of the sensor will be poor. In addition, and please pay attention to the metal shield of the sensor, avoid contact with other external circuits or conductive parts, so as to...

Laster dust sensor Packing: 1.Put the sensor into the Pearl Foam Tray as shown in the picture below. 2.Put the whole plate of sensors in Small Box one by one (Figure 11), then puts a foam plate at the top. Each Small Box can hold 20 sensors. 3.Select the appropriate carton according to the quantity of the order: Carton F: 355 x 310 x 285mm, can hold 160 sensors. (Figure 12) Carton D: 630 x 280 x 405mm, can hold 480 sensors. (Figure 13) Note: Please pay attention to water proof of the carton during transportation. Email: [email protected] Leading gas sensing solutions supplier in China!

Laster dust sensor Communication protocols: Table3-Serial port configuration Name Baud rate Date byte Stop byte Check byte The command to read the measurement results is as follows: Sent: FF 01 35 00 00 00 00 00 CA Received: FF 01 35 DF1-DF2 DF3-DF4 DF5-DF6 DF7-DF8 DF9-DF10 DF11-DF12 DF13-DF14 DF15-DF16 DF17-DF18 [CS] VOC Reserved PM1.0 PM2.5 PM10 TEMP HUMI Response description: 1、DF1-DF2 VOC level = DF1*256^1 + DF2, (Output value multiplied by 10)，unit: ppb Temperature = DF11*256^1 + DF12, unit:℃ ( actual temperature = ( ( DF11*256^1 + DF12)-- Humidity = DF13*256^1 + DF14 , unit:% (actual humidity...