Zhengzhou Winsen Electronics Technology Co., Ltd User’s Manual (Version: 2.6) Issue Date: 2022.04.24 Zhengzhou Winsen Electronics Technology CO., LTD Email: [email protected] Leading gas sensing solutions supplier in China!

Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual’s copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our products. In order to have customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change...

Zhengzhou Winsen Electronics Technology Co., Ltd MH-Z16 Infrared CO2 Gas Module 1. Profile MH-Z16 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has digital output and PWM wave output. This common type infrared gas sensor is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design. 2. Main features...

Zhengzhou Winsen Electronics Technology Co., Ltd Target Gas Measuring Range Temperature compensation HD (Zero calibration, keep low electrical level for more than 7 seconds) TTL electrical level data input TTL electrical level data output Email: [email protected] Leading gas sensing solutions suppli

Zhengzhou Winsen Electronics Technology Co., Ltd 7. Cautions 7.1 Please avoid the pressure of its gilded plastic chamber from any direction, during welding, installation, and use. 7.2 When placed in small space, the space should be well ventilated, especially for diffusion window. 7.3 The module should be away from heat source, and avoid direct sunlight or other heat radiation. 7.4 The sensor should be calibrated regularly and the calibration cycle is recommended for no more than 6 months. 7.5 Do not use the sensor in the high dusty environment for long time. 8.6 To ensure the normal work, the...