Zhengzhou Winsen Electronics Technology Co., Ltd Electrochemical Carbon Monoxide Sensor (Model: MEs-CO) Version: 1.0 Issue Date: 2022-6-10 Zhengzhou Winsen Electronics Technology Co., Ltd Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change...

Zhengzhou Winsen Electronics Technology Co., Ltd MEs-CO Carbon Monoxide sensor MEs-CO Carbon monoxide sensor is a fuel cell type sensor. Carbon monoxide and oxygen undergo corresponding REDOX reaction on the working electrode and the opposite electrode and release charge to form current. The current generated is proportional to the concentration of carbon monoxide and follows Faraday's law. Features * Low consumption * High precision * High sensitivity * Wide linear range * Good anti-interference ability * Long lifespan * Excellent repeatability and stability Application Widely suitable for carbon...

Zhengzhou Winsen Electronics Technology Co., Ltd Mark:Unit is mm, two connection ways are optional, the right type is default Basic circuit. Fig2. MEs-CO test circuit Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd Characterization Fig3.Features of sensitivity, response and recovery Fig5.Sensor output upon variable temperature Fig4.Data graph of concentration linearity features Fig6.V0 Change upon variable temperature Cross sensitivity: MEs-CO sensor also responds to other gases besides CO. Below are the response characteristics of interferential gases Gas Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd During installation, the lead can be welded, and the solder cannot contact the sensor. Before using, power on to aging for more than 48 hours is necessary. Don’t disassemble the sensor. Avoid contacting organic solvent (including Silicone rubber and other adhesive), coatings, medicine, oil and high concentration gases. All the electrochemical sensors shall not be encapsulated completely by resin materials, and shall not immerse in non-oxygen environment, otherwise, it will damage the function of sensor. All electrochemical sensors shall not be...