Zhengzhou Winsen Electronics Technology Co., Ltd Oxygen Gas Sensor (Model No. MED-O2-LA) Version: 1.0 Issue Date: 2023-01-10 Zhengzhou Winsen Electronics Technology Co., Ltd Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change...

Zhengzhou Winsen Electronics Technology Co., Ltd MED-O2-LA Oxygen Gas Sensor MED-O2-LA Oxygen sensor is fuel-cell type electrochemical sensor. The reduction action of oxygen occurs on the working electrode and oxidation reaction of anode materials occurs, release charge to form current. The current generated is proportional to the partial pressure of oxygen and follows Faradi's law. The partial pressure of oxygen could be obtained by measuring value of current. 1.Features * Low consumption * High precision * Wide linear range * Excellent repeatability and stability 2. Application Suitable for...

Zhengzhou Winsen Electronics Technology Co., Ltd Negative electrode Positive electrode 6. Adapter: MED-O2-LA provides an adapter that can be mounted to the sensor thread to allow gas to react directly inside the sensor. The specific structure and size are as follows External Sealing Ring Built-in Sealing Ring Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd During installing, tighten the sensor with the hand, and ensure the air tight seal. Do not use wrenches and other similar mechanical auxiliary procedures, to prevent excessive force resulting in damage to sensor thread. Sensor can only be connected through the components, which match the interface, and do not install sensors by welding, otherwise it will cause the sensor damage or failure. Avoid contacting organic solvent (including Silicone rubber and other adhesive), coatings, medicine, oil and high concentration gases. Don’t disassemble the...