Zhengzhou Winsen Electronics Technology Co., Ltd Electrochemical Carbon Monoxide Sensor (Model No. ME2-CO) Version: 1.3 Issue Date: 2018-02-23 Zhengzhou Winsen Electronics Technology Co., Ltd Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change...

Zhengzhou Winsen Electronics Technology Co., Ltd ME2-CO Electrochemical Carbon Monoxide Sensor ME2-CO electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current. 1.Features * Low consumption * High precision *...

Zhengzhou Winsen Electronics Technology Co., Ltd 5. Characterization Sensitivity, response and recovery time Data graph of linearity Output under different temp. Zero output under different temp. Basic circuit Email: [email protected] Leading gas sensing solutions supplier in China

Zhengzhou Winsen Electronics Technology Co., Ltd 7. Anti-Interference: ME2-CO sensor also responds to other gases besides CO. Below are the response characteristics of interferential gases Before using, power on to aging for more than 48 hours is necessary. Pins can’t be broke off or bent. Don’t disassemble the sensor to avoid the damage caused by electrolyte leakage. Avoid contacting organic solvent (including Silicone rubber and other adhesive), coatings, medicine, oil and high concentration gases. All the electrochemical sensors shall not be encapsulated completely by resin materials, and...