Carbon Monoxide Gas Sensor （Model: ME2-CO-Ф14x14） Manual Version: 1.6 Issue Date. 2023-03-20 Zhengzhou Winsen Electronics Technology Co., L

Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not...

Zhengzhou Winsen Electronics Technology Co., Ltd ME2-CO-Ф14x14 Carbon Monoxide Gas Sensor Profile ME2-CO-Ф14x14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current. Features * Low consumption * High precision...

Zhengzhou Winsen Electronics Technology Co., Ltd Basic Circuit Characterization Fig3.Sensitivity response and recovery Fig4.Data graph of concentration linearity features Fig5.Sensitivity upon variable temperature Fig6.Zero point upon variable temperature Email: [email protected] Leading gas sensing solutions supplier in China!

Zhengzhou Winsen Electronics Technology Co., Ltd Cross sensitivity: ME2-CO-Ф14x14 sensor also responds to other gases besides CO. Below are the response characteristics of interferential gases for reference. Gas During installation, the lead can be welded, and the solder cannot contact the sensor. Before using, power on to aging for more than 48 hours is necessary. Don’t disassemble the sensor. Avoid contacting organic solvent (including Silicone rubber and other adhesive), coatings, medicine, oil and high concentration gases.  All the electrochemical sensors shall not be encapsulated completely...