Catalytic Flammable Gas Sensor （Model: MC106B） User’s Manual Version: 1.5B Valid from: 2022-6-21 Zhengzhou Winsen Electronics Technology Co.,

Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not...

Zhengzhou Winsen Electronics Technology Co., Ltd MC106B Catalytic Flammable Gas Sensor Product MC106B adopts catalytic combustion principle, and its two arms of electric bridge consists of a test element and a compensate element. The resistance of the test element rises once it meets the combustible gases, in the same time, the output voltage of the bridge changes and the voltage variation rises in direct proportion to the gas concentration. The compensate element, as a conference, has the function of compensating temperature and humidity. Features Bridge output voltage in linear Fast response...

Zhengzhou Winsen Electronics Technology Co., Ltd Sensitivity and Response Feature Response & Recovery Curve Sensitivity curve Changing of output signal at different temperature Time(second) Fig4. Response and recovery curve recovery curve recovery curve recovery curve Temperature Fig5.Zero point at different temp. Fig6. Sensitivity at different temp. Changing of output signal at different humidity Voltage Output (mV) Humidity Fig7.Zero point at different humidity Humidity Fig8. Sensitivity at different humidity Email: [email protected]

Zhengzhou Winsen Electronics Technology Co., Ltd Changing of output signal with different voltage supplying Voltage Output (mV) Working voltage(V) Fig10.Sensitivity with different voltage Fig9.Zero Drift with different voltage 线 Long-term Stability The drift in air per year is within ±2mV, in 1%CH4 is within ±2mV. For a short period storage (in 2 weeks), the sensor need be galvanical continuously for 8 hours to reach stability. For long period storage (one year), it need 48 hours. Time (weeks) Fig11. Zero and Sensitivity stability curve Cautions 1 .Following conditions must be prohibited 1.1...

Zhengzhou Winsen Electronics Technology Co., Ltd Applied voltage on sensor should not be higher than stipulated value, even if the sensor is not physically damaged or broken, it causes down-line or heater damaged, and bring on sensors’ sensitivity characteristic changed badly. 1.7 Pins connection When the sensor is connecting to the circuit, one of detection part pins and one of compensation part pins connects as the signal output. The other pin of detection part connects negative electrode, while the other pin of compensation part connects positive electrode. The part with “D” mark on the sensor...