TRL3 PIPELINE HIGH SHEAR DISPERSING EMULSIFIER TRL3 PIPELINE HIGH SHEAR DISPERSING EMULSIFIER Working Principle 1. Medium sucked in by strong axial suction force. Three sets of stators and rotors are equipped in working cavity. Driving shaft 2. Single phase liquid, multi-phase liquid or suspended particles are pumped in working cavity is an arm, electrical motor and the shaft in bearing cabinet in though single-stage, double-stage or three-stage rotor and stators. can be connected by spring coupling to improve the operation quality of 3. No matter what medium property is, pump will evenly shear all the liquid 3. 不论产品性能如何，均会对所有液体组分平等施加可控的、高强度 的剪切力。 4. 剪切率为常量，大小仅取决于所选转子/定子齿及转子端速。 driving shaft. Seal form can be selected in different conditions. It is fit for middle-large scale on-line continuous production or circulated treatment with high-intensity and controllable force. production process. 4. Shearing rate is constant, different sizes depends on gear of rotor and stator and speed of rotor. 优化组合使系统达到有效状态 Optimized Combination Makes The System Reach The Best State 对于各种流程工艺,有不同形式的设备来匹配,并进行优化组合,使系统达到有效状态。常见工艺流程如下: There are equipments in different forms and combine in optimization for different flow processes, to make the system reach the best state. Common process flows are as below: 技术参数 Specifications 型号 Model 转速（RPM） Rotation speed Note: *The data about flow rate in the table is tested by water as the medium.