1. Catalogs
  2. ZHEJIANG XINGSHENG MACHINERY CO.,LTD
  3. TRL-C SUCTION-POWDER MIXINGDISPERSING EMULSIFIER

TRL-C SUCTION-POWDER MIXINGDISPERSING EMULSIFIER
1 /1Page

TRL-C SUCTION-POWDER MIXINGDISPERSING EMULSIFIER

TRL-C SUCTION-POWDER MIXINGDISPERSING EMULSIFIER
1 /1Page

Catalog excerpts

TRL-C SUCTION-POWDER MIXINGDISPERSING EMULSIFIER-1

Specifications Model Flow listed on the table refers to the datas measured when the medium is water. The flow will be varied with transformation of medium's viscosity and density, electrical power also will be different. This pump has short delivery head,it should be installed below the medium's level. High viscosity and solid content make the pump can not feed and deliver normally, a feeding pump or pressure pump with matched flow should be adopted. If the data in the table is modified, no further notification will be given, and the right parameters as per the provided sample. Operation Principle TRL-C system is the use of special high-speed rotation of the rotor have a vacuum, the powder evenly inhalation chamber work, and it evenly distributed in the rapid flow of sap flow, the flow in the blink Secretary powder was completely wet, do not have a massive reunion Of. Then liquid and powder through a high-shear structure for the rotor to any possible spread of the block-poly, the last fully wet) and Yan evenly distributed the materials. Operation Principle The water and powder mixer is composed of main machine boby and centrifgal pump water wheel, which are vertically installed. Through a doublelayer wall pipe,the liquid materials and solid materials are separately pumped in, which can prevent them form agglomerating before entering into the main body. When the liquid enters into the main machine body of mixer at high speed, vacuum will produce in the center of water wheel to suck the solid materials. The soild materials will be evenly sucked in through the regulation of valve under the hopper. It has brief design and multiple functions. lt can rapidly and evenly mix multiple solid materials without contacting the air. The mixing is enough and the product can be recycled. Under some conditions,use"online" and there is no need for recycling. Sanitary design and clamp connection with convenient assembly and disassembly.No need to dismantle any device during the cleaning and disinfecting.Mechanically close the valve to keep the inside sanitation. 40°standard hopper. Specially designed for manufacturers of dairy products and beverages, the equipment can be used to mix solid materials and liquid materials in the production of syrup,sorbitol,glucose,lactose and its side products, in the reduction of milk powder, in the solving into milk with cocoa powder or white sugar, in the solving of whey powder, in the solving into water wtih flour and starch, in the production of salt water and in the preliminary mixing of yoghurt and other dairy products. ZHEJIANG XINGSHENG MACHINERY CO.,LTD ZHEJIANG XINGSHENG MACHINERY CO.,LTD

 Open the catalog to page 1

All ZHEJIANG XINGSHENG MACHINERY CO.,LTD catalogs and technical brochures

  1. mixing tank

    8  Pages

  2. food mill JM

    2  Pages

  3. Colloid mill

    2  Pages

  4. Impeller pump

    3  Pages

  5. Vane pump

    2  Pages

  6. mixing tank

    8  Pages

  7. 转子泵

    3  Pages

  8. rotor pump

    3  Pages

  9. sine pump

    1  Page

  10. sine pump

    1  Page

  11. sine pump

    1  Page

  12. sine pump2

    1  Page

  13. sine pump2

    1  Page

  14. sine pump

    1  Page

  15. mixing tank

    6  Pages

  16. mixing tank

    6  Pages

  17. mixing tank

    6  Pages

  18. mixing tank

    3  Pages

  19. mixing tank

    3  Pages

  20. mixing tank

    3  Pages

  21. 混合罐

    3  Pages

  22. 发酵罐

    1  Page

  23. TRL1

    1  Page

  24. TRL1

    1  Page

  25. tank bottom

    1  Page

  26. TRH

    1  Page

  27. TRL-B

    1  Page

  28. jacket tank

    1  Page

  29. 平叶泵

    1  Page

  30. CIP

    1  Page

  31. 平叶泵

    1  Page

  32. ROTOR PUMP

    3  Pages

  33. ROTOR PUMP

    3  Pages

  34. cip

    1  Page

  35. rotor pump

    4  Pages

  36. TRL-B

    2  Pages

  37. TRL-B (2)

    2  Pages

  38. trl-a

    1  Page

  39. mixer

    3  Pages

  40. magnetic pump

    5  Pages

  41. JMLJMF

    4  Pages

  42. TRH

    6  Pages

  43. mixing tank

    3  Pages

  44. screw pump

    2  Pages

  45. sine pump

    3  Pages

  46. sine pump

    3  Pages

  47. sine pump

    3  Pages

Archived catalogs

  1. sine pump

    3  Pages

  2. rotor pump

    3  Pages

  3. sine pump

    1  Page

  4. sine pump2

    1  Page

  5. sine pump

    1  Page

  6. jacket tank

    1  Page

  7. Colloid mill

    2  Pages

  8. Colloid mill

    2  Pages

  9. TRL-B

    1  Page

  10. TRS

    1  Page

  11. TRL3

    1  Page

  12. Colloid mill

    2  Pages

  13. screw pump

    6  Pages

  14. 2screw pump

    1  Page

  15. sine pump1

    1  Page

  16. SINE PUMP

    5  Pages

  17. mixing tank

    1  Page

  18. mix tanks

    6  Pages

  19. Jacketed pan

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.